Preparation of orthopedic implant by coating bismuth and carbonate doped hydroxyapatite onto acid etched Tİ6AL4V via biomimetic method

Date

2016-10-25

Author

Evis, Zafer
Tezcaner, Ayşen

Metadata

Show full item record

Item Usage Stats

82
views

0
downloads

URI

https://hdl.handle.net/11511/76411

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Preparation of Gadolina Stabilized Bismuth Oxide Doped with Boron via Electrospinning Technique TUNÇ, TUNCAY; Uslu, Ibrahim; Durmusoglu, Senol; Keskin, Selda; Aytimur, Arda; Akdemir, Ahmet (Springer Science and Business Media LLC, 2012-01-01) In this study, boron doped and undoped poly (vinyl) alcohol/bismuth-gadolina acetate (PVA/Bi-Gd) nanofibers were prepared using electrospinning technique then calcinated at 800 degrees C for 2 h. The originality of this study is the addition of boron to metal acetates. The effects of boron doping were investigated in terms of solution properties, morphological changes and thermal characteristics. The characteristics of the fibers were investigated with FT-IR, XRD, SEM and BET. The addition of boron did not ...
Preparation of a conducting flexible material from silane coupling agent and hydroxyl terminated polybutadiene rubber by hydrolysis and condensation Karatas, Y; Toppare, Levent Kamil; Tincer, T (Informa UK Limited, 2003-01-01) Synthesis and characterization of a flexible polymer produced from silane coupling agent (SCA) and hydroxyl terminated polybutadiene (HTPB) were performed. Mechanical properties of chemically and electrochemically prepared conducting composites synthesized from this polymer were investigated. Conductivities of the composites were also measured. Polypyrrole enhanced the mechanical properties of the chemically prepared conducting composite. Doping with iodine greatly changed the conductivity of the composite....
Preparation of La0.8Sr0.2CoO3-δ / (La0.5Sr0.5)2CoO4 Sputtering Targets Using Deformable Compaction Die Sarı, Doğancan; Torunoğlu, Ziya Çağrı; Kalay, Yunus Eren; Öztürk, Tayfur (null; 2017-09-26) Fabrication of sputtering targets deviates from the customary practices in ceramic processing as their production volumes are often quite low. The use of hot-press, in this context, greatly facilities the fabrication of sputter targets since both the density and the dimensions of the target are controlled during the pressing. In the absence of hot press, however, the fabrication requires extensive preliminary work, but difficult to justify due to limited volume production. In this study, in place of customa...
Preparation of anti-adhesive and antibacterial surfaces using polymers Onat, Bora; İErel Göktepe, İrem; Banerjee, Sreeparna; Department of Biotechnology (2017) Layer-by-layer self-assembly of polymers is a versatile technique which can impart new functions to the surfaces of biomedical instruments and biomaterials. Materials which are coated by this technique can exhibit response towards environmental stimuli, such that the controlled release of drugs and similar biologically functional molecules under different stimuli can be observed. In the span of this thesis study, ultra-thin polymer films were prepared through the layer-by-layer self-assembly technique, the ...
Preparation of MFI type zeolite membranes in a flow system with circulation of the synthesis solution Çulfaz Emecen, Pınar Zeynep; Kalıpçılar, Halil (2006-06-20) MFI type zeolite membranes were prepared on seeded tubular alumina supports in a flow system where the synthesis solution was circulated through the support with flow rates of 6, 24 and 48 mL/min. Syntheses were carried out using clear solutions, at 80 degrees C and 95 degrees C at atmospheric pressure in the flow system, and at autogeneous pressure in the batch system. The membranes synthesized in the flow system had thickness of 1-2 mu m, and were thinner than the membranes synthesized in the batch system...

Citation Formats

Z. Evis and A. Tezcaner, “Preparation of orthopedic implant by coating bismuth and carbonate doped hydroxyapatite onto acid etched Tİ6AL4V via biomimetic method,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/76411.