Design of a convergence recorder and improvement of a load monitoring system for measurements in underground mines

Download
002899.pdf
1988
Vural, Talat Devrim
Show full item record
72
views
0
downloads
https://hdl.handle.net/11511/7653
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

DESIGN OF A CONTINUOUS FLOW MAGNETIC RESONANCE SYSTEM FOR RHEOLOGICAL CHARACTERIZATION
Bölükkaya, Zikrullah; Öztop, Halil Mecit; Mert, Behiç; Department of Food Engineering (2022-12)
In food processing, handling, pumping, and extrusion of dilute and viscous fluids, emulsions, and suspensions are important for production purposes. Magnetic Resonance Imaging (MRI) offers the possibility to measure the rheological properties of different fluids in a non-invasive mode and is highly selective (in situ, online) to study the structural changes, or inner transport processes (without wasting samples and disturbing production) in flowing materials. In this study, a bench top Magnetic Resonance I...
Design of an FM-CW radar altimeter
Yetkil, Yaşar Barış; Demir, Şimşek; Department of Electrical and Electronics Engineering (2005)
Frequency modulated continuous wave (FM-CW) radar altimeters are used in civil and military applications. Proximity fuses, automatic cruise control systems of cars, radar altimeter of planes are examples to these applications. The goal of this thesis is to present a method for altitude determination using an FM-CW radar. For this purpose principles of radars and FM-CW systems are studied and related subjects are inspected. After this inspection, algorithms for altitude determination are evaluated. Consequen...
Design of a low-costs warm robotic system for flocking
Demir, Çağrı Ata; Turgut, Ali Emre; Department of Mechanical Engineering (2019)
Swarm robotics is an approach to the coordination of large numbers of robots. The main motivation of this thesis is to study a robotic system designed to do flocking both indoors and outdoors. A walking robot is designed parallel to this purpose. In the first part of thesis, a leg is designed to minimize the displacement of center of mass of robot in vertical axis to eliminate mechanical noise. Mechanism analysis and Matlab optimization tools are utilized in this process. Then, electronic components of robo...
Design of a Re-configurable dual frequency microstrip antenna with integrated RF MEMS switches
Onat, Sinon; Ünlü, Mehmet; Alatan, Lale; Demir, Şimşek; Akın, Tayfun (2005-07-08)
The complete design of a re-configurable dual frequency antenna structure, including its integrated RF MEMS switches and their actuation lines together with a CPW feed, is introduced. The number of switches used in the inset is decreased compared to the hybrid design we presented previously (Onat, S. et al., IEEE Int. Antennas and Propag. Symp., vol.2, p.1812-15, 2004). Instead of utilizing available RF MEMS switches, new switches suitable for this application are designed. Two different switch configuratio...
Design of an advanced composite shell for helicopter pilot helmets
Sünel, Ezgi; Parnas, Kemal Levend; Department of Mechanical Engineering (2012)
This thesis reports on a design study, conducted for an advanced composite helmet shell for helicopter pilots. The helmet shell is expected to provide a level of protection against low velocity impacts with its weight criteria. Therefore, ergonomy, light weight, and the ability to withstand low velocity impact became the main issues for this study. For this purpose, an experimental program has been developed including low velocity impact tests on specimens. The drop height, drop weight, specimen stacking se...
Citation Formats
T. D. Vural, “Design of a convergence recorder and improvement of a load monitoring system for measurements in underground mines,” Middle East Technical University, 1988.
METU IIS - Integrated Information Service open@metu.edu.tr