Melas Kullanılarak Yerel Micractinium sp. ME05 Suşunun Büyütülmesi ve Yağ Üretimi

2018-01-02
Köse Engin, Işkın
Çekmecelioğlu, Deniz
Yücel, Ayşe Meral
Öktem, Hüseyin Avni
Show full item record
92
views
0
downloads
https://hdl.handle.net/11511/76652
19. Uluslararası Katılımlı Ulusal Biyoteknoloji Kongresi, 2017
Department of Food Engineering, Conference / Seminar

Suggestions

Methods for hybrid flow shop scheduling and a case study in an aerospace company
Özmen, Yiğitalp; Meral, Fatma Sedef; Department of Industrial Engineering (2019)
In this study, we address the scheduling problem in Hybrid Flow Shop (HFS) with makespan objective. Since this problem is known to be NP-hard and an HFS is a common environment in real-life manufacturing systems, several approximate solution approaches have been proposed in the literature. Hence, we resort to some of these such as MILP model, dispatching rules, Palmer, CDS, NEH, and Bottleneck Heuristic. Due to the complexity of HFS scheduling problem, MILP model provides only a near optimal solution by usi...
Synthesis and characterization of solvent free alkyd resin with hyperbranched melamine core
Keskin, Nagehan; Gündüz, Güngör; Çolak, Üner; Department of Chemical Engineering (2011)
The use of volatile organic compounds (VOC) in coating materials has adverse effects on both human health and the environment. Due to concern over these problems, coating industry has attempted to decrease the solvent contents of coating materials for the last three decades by developing water dispersed and powder paints. A recently developed method to make solvent free paint is to use highly branched polymers in high solid alkyd resins. Highly branched polymers help to achieve resins with viscosity much lo...
Analysis of thin walled open section tapered beams using hybrid stress finite element method
Akman, Mehmet Nazım; Oral, Süha; Department of Mechanical Engineering (2008)
In this thesis, hybrid stress finite element is formulated for the analysis of the isotropic, thin walled, open section beams with variable cross sections. The beam element has two nodes each having seven degrees of freedom. Assumption of stress field is sufficient to determine the element stiffness matrix. Axial, flexural and torsional effects are taken into account in the analysis. The methodology can be applied both to the tapered and the uniform beams. Throughout this study, firstly element cross-sectio...
Design of smart controllers for hybrid electric vehicles
Özen, Ekin; Dölen, Melik; Department of Mechanical Engineering (2005)
This thesis focuses on the feasibility of designing a commercial hybrid electric vehicle (HEV). In this work, relevant system models are developed for the vehicle including powertrain, braking system, electrical machines and battery. Based on these models ten different HEV configurations are assembled for detailed assessment of fuel consumption. This thesis also proposes a smart power management strategy which could be applied to any kind of HEV configuration. The suggested expert system deals with the exte...
Melez Elektrikli Araçlar için Uzman Denetleyeci Sistemi
Özen, Etkin; Dölen, Melik; Yıldırım, Murat (2008-11-15)
Citation Formats
I. Köse Engin, D. Çekmecelioğlu, A. M. Yücel, and H. A. Öktem, “Melas Kullanılarak Yerel Micractinium sp. ME05 Suşunun Büyütülmesi ve Yağ Üretimi,” presented at the 19. Uluslararası Katılımlı Ulusal Biyoteknoloji Kongresi, 2017, Eskişehir, Turkey, 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/76652.
METU IIS - Integrated Information Service open@metu.edu.tr