Calculataion of the Raman IR frequencies from the volume data at high pressures in N2

Date

2017-08-29

Author

Akay, Özge
Yurtseven, Hasan Hamit

Metadata

Show full item record

Item Usage Stats

84
views

0
downloads

URI

https://hdl.handle.net/11511/76709

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Calibration of uniform circular arrays Aykanat, Buket; Koç, Seyit Sencer; Department of Electrical and Electronics Engineering (2010) In practice, there exist many error sources which distort the antenna array pattern. For example, elements of antenna arrays influence each other (known as mutual coupling), mismatches in cables and element positions affects the antenna radiation pattern and also unequal gain and phase characteristics of RF receiver distorts the received signal. These effects generally degrade the array performance. They cause an increase in sidelobe levels with an accompanying decrease in gain. Also, these errors limit the...
Probabilistic method for computing extreme values of ship motions in irregular seas. Korugan, Tamer; Department of Mechanical Engineering (1975)
Calibration of the finite element model of a long span cantilever through truss bridge using artificial neural networks Yücel, Ömer Burak; Hasançebi, Oğuzhan; Department of Civil Engineering (2008) In recent years, Artificial Neural Networks (ANN) have become widely popular tools in various disciplines of engineering, including civil engineering. In this thesis, Multi-layer perceptron with back-propagation type of network is utilized in calibration of the finite element model of a long span cantilever through truss called Commodore Barry Bridge (CBB). The essence of calibration lies in the phenomena of comparing and correlating the structural response of an analytical model with experimental results a...
Probabilistic modeling of operational dynamic water balance system for a mining facility Pelenk, Ümit Giray; Yılmaz, Koray K.; Department of Geological Engineering (2019) Water management in any environment is quite difficult and complex not only because of the effort that is required to comply with the environmental regulations but also due to the dynamic nature of the system not well suited for the deterministic approaches. As a result, probabilistic approaches are developed to make decisions that can actually represent the uncertainties quantitatively as probability distributions. Such methods, considered to be the best practice in mining industry, are very useful to make...
Calibration of conventional measurement transformers against harmonic components by using field measurements of optical transducers and resistive-capacitive voltage transformers Türkmen, Coşkun Aziz; Ermiş, Muammer; Department of Electrical and Electronics Engineering (2010) It is known from the literature that conventional voltage and current transformers measure inaccurate values for voltage and current harmonics which are parts of power quality. Maximum bandwidth of conventional current transformers, which are used in electricity transmission and distribution systems, is 1.5-2 kHz and it is lower for conventional voltage transformers. Also, it is known that; voltages in some frequency spectrum are measured higher and voltages in another frequency spectrum are measured lower ...

Citation Formats

Ö. Akay and H. H. Yurtseven, “Calculataion of the Raman IR frequencies from the volume data at high pressures in N2,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/76709.