Numerical Modeling of Flow and Scour around a Vertical Cylindrical Pile in Combined Wave and Current

Date

2016-11-20

Author

Baykal, Cüneyt
Fuhrman, David R

Metadata

Show full item record

Item Usage Stats

61
views

0
downloads

URI

https://hdl.handle.net/11511/76846

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Numerical modeling of cold-formed steel sheathed shear walls under lateral loading Topçuoğlugil , Yağmur; Baran, Eray; Department of Civil Engineering (2019) Cold-formed steel (CFS) structural systems have been used increasingly in seismically active regions. Shear walls consisting of CFS framing and sheathing panels constitute one type of lateral force resisting system for such CFS framed buildings. The purpose of this study is to develop an efficient numerical model to predict the lateral load response of shear walls that are framed with CFS profiles and sheathed with oriented strand board (OSB) panels. Numerical modeling of shear walls was conducted in OpenSe...
Numerical modeling of counter-current spontaneous imbibition during underbalanced drilling Naseri, Masoud; Sınayuç, Çağlar (2012-09-10) Mud solid and filtrate invasion are the most common causes of formation damage during overbalanced drilling (OBD), which is a method of drilling in which the wellbore pressure remains greater than formation pressure. During the past ten years, underbalanced drilling operations (UBD), which can be defined as a drilling method in which the wellbore pressure is less than formation pressure, has been growing due to their applications such as prevention of lost circulation, reduction of filtration lost in natura...
Numerical simulation of flow boiling from an artificial cavity in a microchannel Jafari, Rahim; Okutucu Özyurt, Hanife Tuba (2016-06-01) Cahn Hilliard phase-field method is used to numerically simulate subcooled water boiling in which nucleation occurs from an artificial cavity on the inner surface of a microchannel. The boiling initiates from a cavity and the growth and departure of the nucleated bubbles from the cavity are simulated. The velocity, temperature and pressure distributions inside the microchannel have been analyzed. The bubble generation frequency increases by increasing inlet mass flux. For this case of study, the rising tren...
Numerical simulation of two-dimensional incompressible turbulent separeted flows Köksoy, Çağatay; Çelenligil, M. Cevdet; Department of Aeronautical Engineering (2003)
Numerical modeling of failure in composite L-beam and T-joint structures Temiz, Pakize; Çöker, Demirkan; Department of Aerospace Engineering (2022-12-02) Laminated curved-shape composite structures which are used as stiffening components in aerospace, wind, automotive and marine industries are subjected to high radial and tangential stresses. For the scope of this thesis, different modelling strategies are investigated to simulate interlaminar and intralaminar failure in composite L-beam and T-joint structures using commercial finite element (FE) code ABAQUS/Standard 2020. In the first part, [030] and [03/903/03/903/03]s laminated L-beams are evaluated using...

Citation Formats

C. Baykal and D. R. Fuhrman, “Numerical Modeling of Flow and Scour around a Vertical Cylindrical Pile in Combined Wave and Current,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/76846.