A model study to investigate the lubrication conditions of an internal combustion engine main bearings.

Date

1979

Author

Çelikbudak, Halit

Metadata

Show full item record

Item Usage Stats

61
views

0
downloads

URI

https://hdl.handle.net/11511/7717

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

A sand pack experimental study of water coning in a homogeneous bottom water drive oil reservoir. Vrana, M. Lâtif; Department of Mining Engineering (1979)
A study on the effect of elastic ground parameters on circilar tunnel sections. Akcali, Kamil; Department of Civil Engineering (1984)
A numerical simulation study on mixing of inert cushion gas with working gas in an underground gas storage reservoir Kilincer, N; Gumrah, F (2000-12-01) The cushion gas, providing the pressure energy necessary for withdrawal of working gas, makes up the largest part of the investment in underground gas storage projects. The suggested method of reducing this cost is the replacement of some part of the cushion gas with less expensive inert gas, such as nitrogen. In the replacement, there might be some problems due to mixing between natural gas and inert gas. Turkey has sharply increasing demand for natural gas. The constant imported gas and varying demand thr...
A Model study on wave transmission through pile breakwaters Bilici, Çağdaş; Yalçıner, Ahmet Cevdet; Ergin, Ayşen; Department of Civil Engineering (2014) In the present study, wave transmission through pile breakwaters is examined experimentally. The experiments consist of eight model cases of set-up placed in three different wave flumes in Ocean Engineering Research Centre, Civil Engineering Department, Middle East Technical University with a model scale of 12.857. These experiments mainly focused on understanding how wave transmission changes under the influence of regular incident wave characteristics with different breakwater cross sections. Results are ...
A theoretical study on the design of two-dimensional supersonic wind tunnel nozzles. Güneş, Hüseyin; Department of Mechanical Engineering (1975)

Citation Formats

H. Çelikbudak, “A model study to investigate the lubrication conditions of an internal combustion engine main bearings.,” Middle East Technical University, 1979.