STRUCTURING OF WITHIN AND BETWEEN RATIOS WITH THE HELP OF HORIZONTAL AND VERTICAL RATIO TABLES

Date

2017-07-22

Author

Ayan, Rukiye
Işıksal Bostan, Mine
Stephan, Mıchelle

Metadata

Show full item record

Item Usage Stats

30
views

0
downloads

URI

https://hdl.handle.net/11511/77457

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Scrutinization of flow characteristics through orifices Yıldırım, Tuğçe; Tiğrek, Şahnaz; Department of Civil Engineering (2010) Orifices are essential devices for measurement and control of flow. It is important to define the flow field and understand the flow characteristics behind an orifice for the sake of reliability measures in many hydraulic engineering applications. Since analytical and experimental solutions are restricted, a numerical solution is obtained using volume of fluid (VOF) method with the CFD solver, FLUENT, for sharp crested orifices, orifice tubes and slots. The results are compared to the available data in the ...
Calculataion of the Raman IR frequencies from the volume data at high pressures in N2 Akay, Özge; Yurtseven, Hasan Hamit (2017-08-29)
QUANTIFICATION OF SEGREGATION IN PORTLAND CEMENT CONCRETE BASED ON SPATIAL DISTRIBUTION OF AGGREGATE SIZE FRACTIONS ÖZEN, MURAT; Güler, Murat (Slovenian Society for Stereology and Quantitative Image Analysis, 2020-01-01) Segregation is one of the quality standards that must be monitored during the fabrication and placement of Portland cement concrete. Segregation refers to separation of coarse aggregate from the cement paste, resulting in inhomogeneous mixture. This study introduces a digital imaging based technique to quantify the segregation of Portland cement concrete from 2D digital images of cut sections. In the previous studies, segregation was evaluated based on the existence of coarse aggregate fraction at different...
Stratified calibration and group synchronized focal length estimation for structure from motion algorithms Çalışkan, Akın; Alatan, Abdullah Aydın; Department of Electrical and Electronics Engineering (2017) The estimation of unknown calibration parameters of the cameras without using any calibration pattern is critical for the performance of the 3D computer vision applications such as structure from motion, pose estimation, visual odometry, and it is still an open problem for the researchers. In this thesis, our contribution is two folded. First of all, we propose a novel stratified approach for estimating both the focal length and the radial distortion of a camera from given 2D point correspondences without k...
RECURSIVE DEFINING OF FORCE COEFFICIENTS IN MILLING PROCESS WITH ACCELEROMETER Altun, Barış; Çalışkan, Hakan; Özşahin, Orkun (2022-09-02)

Citation Formats

R. Ayan, M. Işıksal Bostan, and M. Stephan, “STRUCTURING OF WITHIN AND BETWEEN RATIOS WITH THE HELP OF HORIZONTAL AND VERTICAL RATIO TABLES,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/77457.