Effects of chert content and type on the alkali silica reaction of mortars

2008-01-01
Bektaş, Fatih
Topal, Tamer
Göncüoğlu, M Cemal
Turanlı, Lutfullah
Show full item record
63
views
0
downloads
https://hdl.handle.net/11511/77702
CONSTRUCTION AND BUILDING MATERIALS
Department of Geological Engineering, Article

Suggestions

Effects of pH and cobalt concentration on the properties of nickel cobalt alloy plating
Başkan, Mertcan; Erdoğan, Metehan; Karakaya, İshak (null; 2016-11-01)
Nickel-Cobalt alloys are among the most prominent materials due to their magnetic properties, wear resistance, thermal conductivity and electrocatalytic activities. Although nickel and/or nickel-cobalt alloys have been plated from Watts solution for a long time, today, especially for the engineering applications, nickel sulfamate based solutions are commonly preferred due to the advantages of low internal stress and high deposition rate. The properties of nickelcobalt alloy platings are directly related to ...
Effects of polymers and CMC concentration on rheological and fluid loss parameters of water-based drilling fluids
Iscan, A. G.; Kök, Mustafa Verşan (2007-01-01)
Fluid loss during drilling operations has a very significant effect on both reservoir formation damage and monetary terms. There are many additives to control this unwanted phenomenon. Nevertheless, most of these substances are artificial chemicals. Thus, they are not only expensive, but also hazardous to the environment. In this article, a more natural method was applied to overcome the higher filtration problems by employing carboxyl methyl cellulose (CMC) and polymers (XT), DSHV, and MAC PR. Drilling flu...
Effects of mix composition and water-cement ratio on the sulfate resistance of blended cements
Sahmaran, M.; Kasap, O.; Duru, K.; Yaman, İsmail Özgür (2007-03-01)
This paper presents an experimental investigation on the sulfate resistance of blended cements containing various amounts of natural pozzolan and/or Class-F fly ash. The performance of blended cements was monitored by exposing the prepared mortar specimens to a 5% Na2SO4 Solution for 78 weeks. For comparison, an ordinary Portland cement (produced with the same clinker as blended cements) and it sulfate resistant Portland cement (produced from a different clinker) were also used. In addition to the cement ch...
Effects of Fe-TiB2 addition as binder phase on the liquid phase sintering behaviour of tungsten carbide cermets
Tankut, A; Timucin, M (2004-01-01)
The sintering behaviour of tungsten carbide compacts with a eutectic Fe-TiB2 mixture was studied. In order to have a clear view of the mechanisms that occur during liquid phase sintering, the hardness, transverse rupture strength, toughness, and densification values were measured and the micrographs were examined for WC-Fe-TiB2 cermets with varying compositions, sintering times and sintering temperatures. The findings were then with the propeerties known for WC-Fe and WC-Co cermets.
Effects of clinker composition on the properties of pozzolonic cements.
Yılmaz, Arın; Tokyay, Mustafa; Department of Civil Engineering (1998)
Citation Formats
F. Bektaş, T. Topal, M. C. Göncüoğlu, and L. Turanlı, “Effects of chert content and type on the alkali silica reaction of mortars,” CONSTRUCTION AND BUILDING MATERIALS, pp. 1183–1190, 2008, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/77702.
METU IIS - Integrated Information Service open@metu.edu.tr