Conceptual and numerical modeling of Güzelyurt akifer, Turkish Republic of Northern Cyprus (TRNC)

Date

2017-10-20

Author

Demir, Cansu
Fanta, Debebe
Akıntuğ, Bertuğ
Ünlü, Kahraman

Metadata

Show full item record

Item Usage Stats

112
views

0
downloads

URI

https://hdl.handle.net/11511/77764

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Conceptual design and analysis of an industrial type vacuum sweeper Aygün, Buket; Albayrak, Kahraman; Department of Mechanical Engineering (2009) In this thesis, design and development and manufacturing processes of an industrial type vacuum sweeper is presented. Thesis is financially supported by Ministry of Industry and Trade-Turkey and Müsan A.Ş. (Makina Üretim Sanayi ve Ticaret A.Ş.) under SAN-TEZ project number 00028.STZ.2007-1. It is aimed to make innovative design changes and developments on the Müsan VSM 060 type vacuum sweeper. To achieve this aim, alternative configuration designs are prepared by using commercial 3D modeling program, Catia™...
Conceptual design and heat transfer investigation of a dense granular flow solar receiver Johnson, Evan Fair; Baker, Derek Keıth; Tarı, İlker; Department of Mechanical Engineering (2017) Solid particles have previously been proposed as an alternative to molten salt as a heat transfer and heat storage medium for concentrating solar power plants. While previous solid particle solar receiver designs use fluidized or falling particles, the new type of receiver proposed in this thesis uses a gravity-driven flow of particles in a dense granular flow regime. Through experimentation with sand, the flow and heat transfer properties were studied in two geometries: vertical tubular and vertical parall...
Conceptual design and evaluation of a multichannel ECG data acquisition device Robaei, Mohammadreza; Serinağaoğlu Doğrusöz, Yeşim; Küçükdeveci, Fikret (2015-01-01) In this study, we developed a conceptual design for a high resolution multichannel ECG data acquisition system for recording of electrical activity of the heart. The system has modular architecture, both in hardware and software layers. It consists of several recording units controlled by sub-microcontrollers, and one main unit that contains the main-microcontroller. Special distributed message based operating system has been developed and embedded to sub-microcontrollers and main-microcontroller to provide...
Conceptual Design and Simulation of Forced Convection Micro Heat Spreaders Sert, Cüneyt (1999-11-21) The micro heat spreader (MHS) is a closed loop single-phase microfluidic system for efficient dissipation of large, concentrated heat loads. The MHS connects two flow expansion chambers through a micro-channel. The bottom surfaces of the expansion chambers consist of electrostatically actuated micro-membranes. A continuous pumping action for the coolant fluid is generated by driving the membranes with a phase difference of \pi. Heat generated by the source located just above the micro-channel is rapidly con...
Conceptual design of a model support system ant its controller for Ankara wind tunnel Ulusal, Nejat; Balkan, Raif Tuna; Department of Mechanical Engineering (2005) Ankara Wind Tunnel (AWT) operated by TÜBİTAK-SAGE is the only big sized wind tunnel in Turkey. The AWT was constructed in late 1940̕s but was not operated until 1993 when the tunnel was turned over TÜBİTAK-SAGE. Since 1993, a series of modernization work has been undergoing in order to match the demands of the 21st century. In wind tunnels, models are positioned by special mechanisms that are instrumented to get the test data specific to the test performed. Models are assembled from their rear sides on thes...

Citation Formats

C. Demir, D. Fanta, B. Akıntuğ, and K. Ünlü, “Conceptual and numerical modeling of Güzelyurt akifer, Turkish Republic of Northern Cyprus (TRNC),” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/77764.