Design of experiments study for determination for the study of the effect of contact parameters in bolted flange connections

Date

2015-05-15

Author

Yılmaz, Samet Emre
Özcihan, Türker
Kayran, Altan
Gürses, Ercan
Çöker, Demirkan

Metadata

Show full item record

Item Usage Stats

61
views

0
downloads

URI

https://hdl.handle.net/11511/77789

Conference Name

International Conference on Advances in Mechanical Engineering (ICAME 2015), (13 - 15 Mayıs 2015)

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Design of selective linear phase cross-coupled dielectric resonator filters Öztürk, Onur Ozan; Dural Ünver, Mevlüde Gülbin; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2018) In this work, a selective linear phase filter is designed in cross-coupled form using dielectric resonators in Ku band to be used as a channel filter in IMUX of a satellite receiver. Extreme delay flatness is required: 1.5ns delay ripple over 60 % of the passband and symmetric cross-coupled filter with all ideal inverter couplings realizing four finite transmission zeros (FTZ) satisfying also the delay flatness requirements. Design is carried out on the software program FILPRO, then optimized in ADSTM and t...
Design of Selective Linear Phase Cross-Coupled Dielectric Resonator Filters Ozturk, Onur Ozan; Oruc, Sacid; Alicioglu, Bulent; Yıldırım, Nevzat (2018-11-02) In this paper, a highly selective linear phase filter is designed and implemented in cross-coupled form using dielectric resonators in Ku band to be used as a channel filter in IMUX of a satellite receiver. Extreme delay flatness is required: 1.5 nS delay ripple over 60 % of the passband and 12 nS near the band edges. The initial design is carried out as 10 resonator symmetric cross-coupled filter with all ideal inverter couplings realizing two finite transmission zeros (FTZ) satisfying also the delay flatn...
Design of metasurface polarization converter from linearly polarized signal to circularly polarized signal AKGÖL, OĞUZHAN; ÜNAL, EMİN; ALTINTAŞ, OLCAY; KARAASLAN, MUHARREM; KARADAĞ, FARUK; Sabah, Cumali (Elsevier BV, 2018-01-01) In this study, we both numerically and experimentally present a metasurface (MS) polarization converter to transform linearly polarized signal into circularly polarized one. The unit cell consists of two rectangular metallic patches placed at the crossed corners of rectangularly arranged inclusions. The results of a full-wave Electromagnetic (EM) simulator are compared to those of free space measurement using two horn antenna at microwave frequency regime. For a linearly polarized antenna, the s-parameters ...
Design and experimental investigation of microchannel heat exchanger Çetin, Murat; Güvenç Yazıcıoğlu, Almıla; Department of Mechanical Engineering (2010) Due to the high performance of electronic components, the heat generation is increasing dramatically. Heat dissipation becomes a significant issue in efficiency promotion and stable operation. Microchannels are of current interest for use in heat exchangers where very high heat transfer performance is desired. Microchannels provide high heat transfer coefficients because of their small hydraulic diameters. In this study, the design and experimental investigation of fluid flow and heat transfer in a microcha...
Design of Grid Connected PWM Converters Considering Topology and PWM Methods for Low-Voltage Renewable Energy Applications Kantar, Emre; Hava, Ahmet Masum (2014-05-21) This paper assesses the feasibility three-phase PWM three-level voltage source converters (VSCs), namely NPC-type VSC (3L-NPC) and T-type VSC (3L-T) as alternatives to standard three-phase PWM two-level VSC (2L-VSC) for low-voltage grid interface applications, The topological performances are compared through a design algorithm regarding varying switching frequency, load condition, modulation index, and converter side inductance under distinct pulse-width modulation methods, Design of the LCL filter is also...

Citation Formats

S. E. Yılmaz, T. Özcihan, A. Kayran, E. Gürses, and D. Çöker, “Design of experiments study for determination for the study of the effect of contact parameters in bolted flange connections,” presented at the International Conference on Advances in Mechanical Engineering (ICAME 2015), (13 - 15 Mayıs 2015), İstanbul, Türkiye, 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/77789.