Laminated shell modeling of sandwich beams with ramp region under four point bending loading via structural optimization

Date

2017-09-26

Author

Yardımcı, Ozan
Gürses, Ercan

Metadata

Show full item record

Item Usage Stats

51
views

0
downloads

URI

https://hdl.handle.net/11511/77805

Conference Name

EASN International Conference on Innovation in European Aeronautics Research, (26 - 29 Eylül 2017)

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Laminar natural convective heat transfer in a cavity Gövsa, Cemal; Paykoç, Ediz; Department of Mechanical Engineering (1988)
Laminate processing effect on microvoids and hydraulic fluid absorption of Quartz/BMI laminates Hurdelbrink, Keith R.; Güloğlu, Görkem Eğemen; Anderson, Jacob P.; Siddique, Zahed; Cengiz Altan, M. (2015-01-01) © 2015 International Committee on Composite Materials. All rights reserved.Use of composite materials in complex and robust systems, such as aircraft fuselage and load-bearing structures, is becoming more prevalent as analysis and manufacturing techniques improve. Bismaleimide (BMI) resin with Quartz (AQ581) fiber reinforcement is one such composite material used in products requiring a high glass transition temperature and/or favorable electrical properties such as a low dielectric constant. Laminate fabri...
Capillary boosting for enhanced heat pipe performance through bifurcation of grooves: Numerical assessment and experimental validation Saygan, Samet; Akkus, Yigit; Dursunkaya, Zafer; Cetin, Barbaros (2022-10-01) © 2022 Elsevier LtdIn this study, an enhanced heat pipe performance for grooved heat pipes has been demonstrated through capillary boosting with the introduction of the bifurcation of grooves. Wider grooves regularly branch to narrower grooves such that the total cross-sectional liquid flow area remains approximately the same. Following the computational framework drawn by a recently developed heat pipe analysis toolbox (H-PAT), we develop a numerical model for the heat pipes with tree-like groove architect...
LAMINAR NATURAL CONVECTIVE HEAT-TRANSFER IN AN AIR-FILLED PARALLELOGRAMIC CAVITY Yüncü, Hafit; YAMAC, S (Elsevier BV, 1991-07-01) In this study parallelogramic cavity is modelled as an air-filled enclosure bounded by two isothermal and two insulated walls. The insulated walls are inclined at an angle delta to the vertical plane. The basic governing equations i.e., conservation of mass, momentum and energy are solved by the numerical solution technique developed by Gosman et al. [1, 2]. Average heat transfer coefficient based on the temperature difference of vertical walls indicates that the direction of heat flow plays an important...
Solidification behavior, glass forming ability and thermal characteristics of soft magnetic Fe-Co-B-Si-Nb-Cu bulk amorphous alloys AYKOL, Muratahan; Akdeniz, Mahmut Vedat; Mehrabov, Amdulla (2011-09-01) The effect of varying Cu content on the bulk glass forming ability (GFA) of (Fe(0.36)Co(0.36)B(0.192)Si-(0.048)Nb(0.04))(100-X)Cu(X) alloys (X = 0, 0.5, 0.75 and 1.0) is revealed by investigating the thermal behaviors and phase competitions upon solidification. The changes in GFA are interpreted in terms of suppression of consecutive solidification reactions via microstructural and thermal features. Instead of the type of the primary crystallization product originating from the prevalent atomic order in the...

Citation Formats

O. Yardımcı and E. Gürses, “Laminated shell modeling of sandwich beams with ramp region under four point bending loading via structural optimization,” presented at the EASN International Conference on Innovation in European Aeronautics Research, (26 - 29 Eylül 2017), Warszawa, Polonya, 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/77805.