Investigation on Solidification Kinetics of Bulk Amorphous Materials by Differential Scanning Calorimetry

Date

2002-06-05

Author

Pehlivanoğlu, Kaan
Yazgan, Betül
Akdeniz, Mahmut Vedat
Mehrabov, Amdulla

Metadata

Show full item record

Item Usage Stats

89
views

0
downloads

URI

https://hdl.handle.net/11511/77949

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Investigation on the incorporation of quantum dot thin film layers in the organic and inorganic solar cell structures Candan, İdris; Erçelebi, Ayşe Çiğdem; Parlak, Mehmet; Department of Physics (2016) Thin films based photovoltaic solar cell technologies have the Shockley-Queisser limit for maximum efficiencies and these cells can only collect photon in the specific energy range due to their band gap. New approaches are needed to improve the power conversion efficiency (PCE) of photovoltaic devices. Quantum dots (QDs) thin film layer inside any device structure is particularly attractive candidates to increase the PCE of solar cells due to their size adjustable band gap values, multiple exciton generatio...
INVESTIGATION OF CONDUCTIVITY CHARACTERISTICS OF Zn-In-Se THIN FILMS Gullu, H. H.; Parlak, Mehmet (World Scientific Pub Co Pte Lt, 2020-01-01) Zn-In-Se thin films were fabricated on the ultrasonically cleaned glass substrates masked with clover-shaped geometry by thermal evaporation of its elemental sources. Temperature-dependent conductivity characteristics of the films were investigated under dark and illuminated conditions. The semiconductor type of the films was found as n-type by thermal probe test. According to the van der Pauw technique, the dark electrical conductivity analyses showed that the variations of conductivity of unannealed and a...
Investigation of kinetic parameters in PVC emulsion polymerization Karakaş, Gürkan; Orbey, Neşe; Department of Chemical Engineering (1988)
Investigation of microstructure inhomogeneity in SiCp-reinforced aluminum matrix composites Gacsi, Zoltan; Gür, Cemil Hakan; Makszimus, Andrea; Pieczonka, Tadeusz (2007-01-01) The type, volume fraction, size, shape and arrangement of embedded particles influence the mechanical properties of the particle reinforced metal matrix composites. This presents the investigation of the SiC particle and porosity distributions in various aluminum matrix composites produced by cold- and hot-pressing. The inicrostructures were characterized by optical microscopy and stereological parameters. SiC and porosity volume fractions, and the anisotropy distribution function were measured to establish...
Investigation on ionicity and its effect on charge carrier selectivity for n-type crystalline silicon solar cells Eldeeb, Basil Mohamed Mahmoud; Turan, Raşit; Department of Physics (2022-8-31) Optoelectronic device performance is not exactly governed by the band alignment between two materials. Interfacial layers in combination with a metal cap dictate charge-carrier selectivity and hence semiconductor device performance. Considering the investigations done on a wide array of solid-state surfaces and heterojunctions done both experimentally and theoretically, it is found that the electron localizability, which is quantifiable through the bandgap energy and band width, plays an integral role in th...

Citation Formats

K. Pehlivanoğlu, B. Yazgan, M. V. Akdeniz, and A. Mehrabov, “Investigation on Solidification Kinetics of Bulk Amorphous Materials by Differential Scanning Calorimetry,” 2002, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/77949.