Elastic-plastic behavior of an unsaturated compacted non-plastic silt

Date

2017-05-11

Author

Ahmadi Naghadeh, Reza
Toker, Nabi Kartal

Metadata

Show full item record

Item Usage Stats

60
views

0
downloads

URI

https://whova.com/embedded/session/icpma_201705/177099/
https://hdl.handle.net/11511/77956

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Elastic-plastic solutions of a long tube subjected to a temperature cycle Kaya, Yasemin; Eraslan, Ahmet Nedim; Department of Engineering Sciences (2014) In many engineering applications, cylindrical structures are often subjected to various temperature fluctuations. When the temperature gradient is high enough, the thermal stresses build up in the structure and these stresses may cause the permanent deformation of the body. Therefore, determination and detailed understanding of the thermoelastoplastic stresses in the cylindrical elements are an important issue of engineering design to predict the failures and improve the safety and reliability of the produc...
Elastic Properties of GaS1−xSex Layer Mixed Crystals by Brillouin Scattering Hasanlı, Nızamı; Akınoğlu, Bülent Gültekin (Wiley, 1993-01-01)
Elastic analysis of a circumferential crack in an isotropic curved beam using modified mapping-collocation method Amireghbali, Aydın; Çöker, Demirkan; Department of Aerospace Engineering (2013) The modified mapping-collocation (MMC) method is applied to analyze a circumferential crack in an isotropic curved beam. Based on the method a MATLAB code was developed to obtain the stress field. Incorporating the stress correlation technique, the opening and sliding fracture mode stress intensity factors (SIF)s of the crack for the beam under pure bending moment load case are calculated. The MMC method aims to solve two-dimensional problems of linear elastic fracture mechanics (LEFM) by combining the powe...
Elastic-plastic stress analysis of a thermoplastic composite disc under linear temperature distribution Sayman, O; Pekbey, Y; Sayman, S (SAGE Publications, 2006-01-01) In the present study, an elastic-plastic stress analysis is carried out on a composite thermoplastic disc reinforced by steel fibers, curvilinearly. Radial and tangential stresses are obtained under a liner temperature distribution. The magnitude of the tangential stress component for elastic and elastic-plastic cases is higher than that of the radial stress component. The tangential stress component is compressive and tensile on the inner and outer surfaces, respectively and is the highest on the inner sur...
Elastic analysis of a circumferential crack in an isotropic curved beam using the modified mapping-collocation method Amireghbali, Aydin; Çöker, Demirkan (2014-07-01) The modified mapping-collocation (MMC) method was applied to the boundary value problem (BVP) of a circumferential crack in an isotropic elastic curved beam subjected to pure bending moment loading. The stress correlation technique is then used to determine opening and sliding mode stress intensity factor (SIF) values based on the computed stress field near the crack tip. The MMC method aims at solving two-dimensional BVP of linear elastic fracture mechanics (LEFM) circumventing the need for direct treatmen...

Citation Formats

R. Ahmadi Naghadeh and N. K. Toker, “Elastic-plastic behavior of an unsaturated compacted non-plastic silt,” 2017, Accessed: 00, 2021. [Online]. Available: https://whova.com/embedded/session/icpma_201705/177099/.