Fabrication of CZTSSe Spuerstrate Solar Cells by RF Magnetron Sputtering Technique

Date

2018-09-05

Author

Terlemezoğlu, Makbule
Bayraklı, Özge
Doğru, Çiğdem
Güllü, Hasan Hüseyin
Çiftpınar, Emine Hande
Erçelebi, Ayşe Çiğdem
Parlak, Mehmet

Metadata

Show full item record

Item Usage Stats

120
views

0
downloads

URI

https://hdl.handle.net/11511/77979

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Fabrication of low reflective nanopore-type black Si layer using one-step Ni-assisted chemical etching for Si solar cell application Takaloo, AshkanVakilipour; Kolahdouz, Mohammadreza; POURSAFAR, Jafar; ES, FIRAT; Turan, Raşit; Ki-Joo, Seung (IOP Publishing, 2018-03-01) Nanotextured Si fabricated through metal-assisted chemical etching (MACE) technique exhibits a promising potential for producing antireflective layer for photovoltaic (PV) application. In this study, a novel single-step nickel (Ni) assisted etching technique was applied to produce an antireflective, nonporous Si (black Si) in an aqueous solution containing hydrofluoric acid (HF), hydrogen peroxide (H2O2) and NiSO4 at 40 degrees C. Field emission scanning electron microscope was used to characterize differen...
Fabrication of gallic acid loaded Hydroxypropyl methylcellulose nanofibers by electrospinning technique as active packaging material Aydogdu, Ayca; Şümnü, Servet Gülüm; Şahin, Serpil (Elsevier BV, 2019-03-15) The objective of this study was to encapsulate gallic acid in Hydroxypropyl methylcellulose (HPMC)/poly-ethylene oxide (PEO) blend nanofiber by using electrospinning and examine the usage of nanofibers as active packaging materials. Gallic acid loaded nanofibers showed homogenous morphology. Gallic acid was loaded into nanofibers efficiently and nanofibers showed strong antioxidant activity. As the gallic acid amount increased, the TGA curves had shifted one stage to two stage degradation and degradation te...
Fabrication of well-organized plasmonic interfaces by nanosphere lithography Kasap, Yusuf; Bek, Alpan; Department of Physics (2016) In this thesis, we propose to design plasmonic metal nanostructures by utilizing lithography with nanospheres of various diameters. When deposited at a high surface coverage, nanospheres form closed-pack trigonal lattices on surfaces, leaving concave triangular gaps in-between. After evaporation of thin metal films and lifting-off the nanospheres, metal islands which support plasmonic resonances and of the gap shape are fabricated in a trigonal periodicity on the substrate material. Depending on nanosphere ...
Fabrication of Al/Al2O3 composites by in-situ powder metallurgy (IPM) Pournaderi, S.; Mahdavi, S.; Akhlaghi, F. (2012-10-01) Al6061/Al2O3 composites containing 15-40 vol.% of different-sized (37-276 mu m) alumina particles were produced by in-situ powder metallurgy (IPM). In this method, the stir casting and powder metallurgy (PM) synthesizing processes are combined into an integrated net shape forming process. For the preparation of each powder mixture, alumina particles were added to the molten aluminum alloy, and the resulting slurry was stirred at a specified temperature for a predetermined time. During the stirring process, ...
Fabrication of ZnO CdS CdTe core shell nanorod arrays for extremely thin absorber eta CdTe solar cells Kartopu, Giray; Yerci, Selçuk; Ünalan, Hüsnü Emrah; Barrioz, Vincent; Aurang, Pantea; Hadibrata, Wisnu; Qu, Yiu; Koç, Mehmet; Gürlek, Ali; Turan, Raşit; Irvine, Stuart (null; 2016-04-22)

Citation Formats

M. Terlemezoğlu et al., “Fabrication of CZTSSe Spuerstrate Solar Cells by RF Magnetron Sputtering Technique,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/77979.