Development of High/Efficient Performance for Coupled Structural and Acoustic Problem

1998-12-25

Suggestions

Development of structural health monitoring and artificial intelligence based damage detection and early warning system for truss like in-water structures
Kara, Serap; Türer, Ahmet; Department of Civil Engineering (2019)
Continuously growing industry necessitates substantial amount of energy which is frequently harvested in-water regions. Electricity, gas, and oil collected offshore areas generally require platforms constructed in seas and oceans. Inspection of offshore platforms is hard and it is difficult to detect damage in early stages of these structures that perform in harsh salty water environments, which might cause catastrophic failures if unattended. Damage identification of these structures is a challenging issue...
Development of expert system for artificial lift selection
Aliyev, Elshan; Sınayuç, Çağlar; Department of Petroleum and Natural Gas Engineering (2013)
During the reservoir production life reservoir pressure will decline. Also after water breakthrough the fluid column weight will increase as hydrostatic pressure will increase because of increased water and oil mixture density. In this case, reservoir pressure may not be enough to lift up the fluid from bottom to the surface. These reasons decrease or even may cause to stop flowing of fluids from the well. Some techniques must be applied to prevent the production decline. Artificial lift techniques are appl...
DEVELOPMENT OF STRENGTH REDUCTION FACTORS FOR PERFORMANCE-BASED SEISMIC DESIGN OF BRIDGES IN FAR-FAULT SEISMIC REGIONS
Rabaia, Tareq Z. S.; Dicleli, Murat; Department of Engineering Sciences (2021-9)
In this thesis, a methodology to develop strength reduction factors for performance-based seismic design of bridges in far-fault seismic regions is presented. The presented methodology is mainly based on performing linear 5%-damped response spectrum analyses (RSA) and nonlinear time history analyses (NTHA) of bridge piers modeled as single degree of freedom (SDOF) systems. Bridge piers of both circular and rectangular sections are analyzed for wide ranges of various design parameters considering several sub...
Development of realistic head models and forward problem solution in electro-magnetic source imaging
Gençer, Nevzat Güneri (2008-09-01)
Development of sled range test facility for store separation model
Özyüksel, Alaettin Arda; Balkan, Raif Tuna; Department of Mechanical Engineering (2007)
The aim of this thesis is to develop a test facility in order to validate the safe separation of a store model from the aircraft model with the analysis of the acquired data. Different alternatives are considered in the conceptual design and a facility is selected which contains the rail constructed 5 meters above the ground. 300 meter test range is used to accelerate the aircraft model, attached to the carriage with solid rocket engines. The concept is to accelerate the carriage within the first 100 meters...
Citation Formats
A. Sorguç, “Development of High/Efficient Performance for Coupled Structural and Acoustic Problem,” 1998, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/78148.