The Effect of Disjoining Pressure on the Condensing Film in a Flat Grooved Heat Pipe

2018-06-14
Alipour, Mobin
Dursunkaya, Zafer
Show full item record
66
views
0
downloads
https://hdl.handle.net/11511/78480
Unverified, Conference / Seminar

Suggestions

The effect of disjoining pressure on the shape of condensing films in a fin-groove corner
Akdag, Osman; Akkus, Yigit; Dursunkaya, Zafer (2019-08-01)
Thin film condensation is commonly present in numerous natural and artificial processes. Phase-change driven passive heat spreaders such as heat pipes, which are widely used in electronics cooling, employ a continuous condensation process at the condenser region. When the wick structure of a heat pipe is composed of grooves, the top surfaces of the walls (fins) located between consecutive grooves function as the major source of condensation and the condensate flows along the fin top into the grooves. Modeli...
The effect of axial conduction on heat transfer in a liquid microchannel flow
Cole, Kevin D.; Cetin, Barbaros (2011-05-01)
Analysis is presented for conjugate heat transfer in a parallel-plate microchannel. Axial conduction in the fluid and in the adjacent wall are included. The fluid is a constant property liquid with a fully-developed velocity distribution. The microchannel is heated by a uniform heat flux applied to the outside of the channel wall. The analytic solution is given in the form of integrals by the method of Green's functions. Quadrature is used to obtain numerical results for the local and average Nusselt number...
The effect of hydrodynamic parameters on the production of Pickering emulsions in a baffled stirred tank
Abdulrasaq, Usman K.; Ayrancı Tansık, İnci (Wiley, 2019-10-01)
Pickering emulsions are potential industrial scale alternatives to surfactant-based emulsions. The stability of Pickering emulsions depends on the physicochemical nature of the liquid-particle interface and the hydrodynamic conditions of the production process. This article investigates the effect of hydrodynamic conditions on the drop size of concentrated Pickering emulsions in baffled stirred tanks. Oil in water emulsions composed of silicon oil, water, and hydrophilic glass beads as stabilizing particles...
The effect of aggregate packing on strength of concrete
Barın, Tarkan; Tokyay, Mustafa; Department of Civil Engineering (2001)
The Effect of retained austenite and carbide distribution on the wear resistance of bearing steel
Özgeneci, Zeren; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2017)
This study aims to investigate the effect of the amount of retained austenite and undissolved carbides on the wear resistance of the heat treated bearing steels. As inner and outer ring material 100Cr6 steel grade was used. The specimens were austenitized in the range 800°C to 1000°C, and then, quenched to room temperature in oil to produce a hard martensitic phase. A composite microstructure of undissolved carbides, martensite and retained austenite were observed in hardened steel specimens. It was seen th...
Citation Formats
M. Alipour and Z. Dursunkaya, “The Effect of Disjoining Pressure on the Condensing Film in a Flat Grooved Heat Pipe,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/78480.
METU IIS - Integrated Information Service open@metu.edu.tr