Stress and deformation distribution in a dragline bucket using finite element analysis

2011-10-21
IV. Balkan Mining Congress, 2011

Suggestions

Stress and fracture analysis of riveted joints
Keçelioğlu, Galip; Dağ, Serkan; Department of Mechanical Engineering (2008)
The objective of this study is to model and analyze a three dimensional single riveted lap joint (with and without a crack). By using finite element method, stress and fracture analyses are carried out under both the residual stress field and external tensile loading. Using a two step simulation, riveting process and subsequent tensile loading of the lap joint are simulated to determine the residual and overall stress state. Residual stress state due to riveting is obtained by interference and clamping misf...
Stress and fracture analysis of riveted joints
Keçelioğlu, Galip; Dağ, Serkan; Department of Mechanical Engineering (2008)
The objective of this study is to model and analyze a three dimensional single riveted lap joint (with and without a crack). By using finite element method, stress and fracture analyses are carried out under both the residual stress field and external tensile loading. Using a two step simulation, riveting process and subsequent tensile loading of the lap joint are simulated to determine the residual and overall stress state. Residual stress state due to riveting is obtained by interference and clamping misf...
Stress resultants plasticity with general closest point projection
Sarıtaş, Afşin (Elsevier BV, 2011-03-01)
In this paper, general closest point projection algorithm is derived for the elastoplastic behavior of a cross-section of a beam finite element. For given section deformations, the section forces (stress resultants) and the section tangent stiffness matrix are obtained as the response for the cross-section. Backward Euler time integration rule is used for the solution of the nonlinear evolution equations. The solution yields the general closest projection algorithm for stress resultants plasticity model. Al...
Stress distributions in elastic-plastic rotating disks with elliptical thickness profiles using Tresca and von Mises criteria
Eraslan, Ahmet Nedim (Wiley, 2005-04-01)
Analytical and numerical solutions for the elastic-plastic stress distribution in rotating variable thickness solid and annular disks are obtained under plane stress assumption. The thickness of the disk is assumed to vary radially in elliptic form which represents a wide range of continuously variable nonlinear cross-sectional profiles. Tresca's yield criterion and its associated flow rule are used to obtain analytical solutions for a linear hardening material. A computational model is developed to obtain ...
Stress-strain diagrams of concrete as a function of the rate of load application respectively of the rate of load application respectively of the rate of strain application.
Tarman, Mete; Department of Civil Engineering (1965)
Citation Formats
O. Gölbaşı and N. Demirel, “Stress and deformation distribution in a dragline bucket using finite element analysis,” presented at the IV. Balkan Mining Congress, 2011, Ljubljana, Slovenia, 2011, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/78643.