Experimental Investigation Micron Level Clearances Using Fiber Optic Interferometry

Date

2009-05-13

Author

Yıldırım, Murat
Okutucu Özyurt, Hanife Tuba
Dursunkaya, Zafer

Metadata

Show full item record

Item Usage Stats

33
views

0
downloads

URI

https://hdl.handle.net/11511/78700

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Experimental investigation of the failure of air plasma sprayed thermal barrier coatings Kütükoğlu, Başar; Çöker, Demirkan; Department of Aerospace Engineering (2015) In this thesis, an experimental method is developed to determine the interfacial fracture toughness of air plasma sprayed thermal barrier coatings. The thesis is composed of three major parts. In the first part, nanoindentation is used to measure the elastic modulus and hardness of the APS TBC specimens composed of three major layers: Inconel 718 substrate, NiCrAlY based metallic bond coat (BC) and YSZ based ceramic top coat (TC). Microscopy, XRD and EDS are used for metallurgical characterization. In the s...
Experimental Investigation of Cuttings Transport in Horizontal Wells Using Aerated Drilling Fluids Gül, Sercan; Kuru, Ergün; Parlaktuna, Mahmut (null; 2017-11-16)
Experimental investigation of CO tolerance in high temperature PEM fuel cells DEVRİM, YILSER; Albostan, Ayhan; Devrim, Huseyin (Elsevier BV, 2018-10-04) In the present work, the effect of operating a high temperature proton exchange membrane fuel cell (HT-PEMFC) with different reactant gases has been investigated throughout performance tests. Also, the effects of temperature on the performance of a HT-PEMFC were analyzed at varying temperatures, ranging from 140 degrees C to 200 degrees C. Increasing the operating temperature of the cell increases the performance of the HT-PEMFC. The optimum operating temperature was determined to be 160 degrees C due to th...
Experimental investigation of cuttings transport in horizontal wells using aerated drilling fluid Gül, Sercan; Parlaktuna, Mahmut; Kuru, Ergün; Department of Petroleum and Natural Gas Engineering (2017) A new experimental approach has been introduced in this thesis for the cuttings transport in horizontal wellbores with the introduction of drag reducers into the aerated drilling fluids. Advanced Flow Loop System (annular test section of 21 ft. long 2.91-in. ID transparent casing and 1.85 in. OD inner drill pipe) in Middle East Technical University Petroleum and Natural Gas Engineering Department have been used for the experiments. The liquid phase has been water and water-PHPA copolymer mixture where the g...
Experimental Investigation of Metamaterial Array Structures With Split Ring Resonators Ekmekci, Evren; Topalli, Kagan; Akın, Tayfun; Sayan, Gönül (2009-04-11) In this paper, transmission characteristics (vertical bar S-21 vertical bar) for a split ring resonator (SRR) type unit cell and or SRR arrays with various dimensions and array sizes are investigated in a comparative manner to show the effects of array dimensions and array sizes on the vertical bar S-21 vertical bar spectra. For this purpose, SRR based metamaterial arrays with various dimensions and sizes are fabricated and their vertical bar S-21 vertical bar characteristics are measured by Agilent 8720D n...

Citation Formats

M. Yıldırım, H. T. Okutucu Özyurt, and Z. Dursunkaya, “Experimental Investigation Micron Level Clearances Using Fiber Optic Interferometry,” 2009, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/78700.