MOCVD büyütme metodu ve teorisi

Date

2008-05-08

Author

İmer, Muhsine Bilge

Metadata

Show full item record

Item Usage Stats

67
views

0
downloads

URI

https://hdl.handle.net/11511/78746

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Compensation methos for quasi-static acceleration sensitivity of MEMS gyroscopes / Gavcar, Hasan Doğan; Azgın, Kıvanç; Department of Electrical and Electronics Engineering (2014) This thesis presents the quasi-static acceleration compensation methods for a fully decoupled MEMS gyroscope. These methods are based on the utilization of the amplitude difference information between the residual quadrature signals on the differential sense mode electrodes to sense the static acceleration acting on the sense mode of the gyroscope. There are three different quasi-static acceleration compensation methods presented in this thesis. In the first method, the static acceleration is measured by co...
MEMS Malzeme Karakterizasyonu için Bütünlesik bir Elektrostatik Mikro Bükülme Test Yapısı Tasarımı ve Gerçeklestirilmesi Yıldırım, Ender; Akın, Tayfun; Arıkan, Mehmet Ali Sahir (2012-02-01)
MEMS Malzeme Karakterizasyonu için Bütünleşik bir Elektrostatik Mikro Bükülme Test Yapısı Tasarımı ve Gerçekleştirilmesi Yıldırım, Ender; Arıkan, Mehmet Ali Sahir; Akın, Tayfun (2012-01-01)
Development of a parylene bonding based fabrication method for MEMS gravimetric resonant based mass sensors Gökçe, Furkan; Külah, Haluk; Department of Electrical and Electronics Engineering (2017) This thesis reports development of a parylene bonding based fabrication method for MEMS gravimetric resonant based mass sensors that are integrated with microfluidics for real-time detection when there is a liquid flow through the microfluidic channels. Parylene bonding has been optimized by conducting several bare bonding experiments. The optimized bonding takes place at 250ºC, in vacuum (1 mTorr) and with 2000 N of vertical piston force for 1 hour. The average shear bonding strength is 15.58 MPa for the o...
Correction of temperature and acceleration effects on MEMS gyro output signals / Ali, Muhammad; Akın, Tayfun; Azgın, Kıvanç; Department of Electrical and Electronics Engineering (2014) The scope of this thesis is to study the effects of temperature and acceleration on a MEMS gyroscope and present a workable solution to compensate these errors using various techniques. Compensation for errors is implemented considering the output bias data of the gyroscope. The study also provides comparison of these various techniques, namely Polynomial Curve fitting and Neural Networks. In addition, Moving Average Filtering is used as an auxiliary technique. The study provides novelty of compensating bot...

Citation Formats

M. B. İmer, “MOCVD büyütme metodu ve teorisi,” 2008, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/78746.