Use of amino and mercapto functionalized silicate for sorption of Se(IV) and Se(VI)

Date

2009-06-23

Author

Dönertaş, Esen
Boyacı, Ezel
Eroğlu, Ahmet Emin
Çağır, Ali
Shahwan, Talal

Metadata

Show full item record

Item Usage Stats

85
views

0
downloads

URI

https://hdl.handle.net/11511/78986

Collections

Unverified, Article

Suggestions

OpenMETU
Core

Use of chitosan and chitosan immobilized silicate for sorption and preconcentration of Arsenic (V) Boyacı, Ezel (2007-08-23)
Use of modified silicate for removal and speciation of As(III) and As(V) from waters Boyacı, Ezel; Çağır, Ali; Shahwan, Talal (2009-06-23)
Use of Different Alkylammonium Salts in Clay Surface Modification for Epoxy-Based Nanocomposites Nakas, G. Ipek; Kaynak, Cevdet (Wiley, 2009-03-01) Layered silicates become widely used reinforcement material in the polymer nanocomposite production in recent years due to their high aspect ratio, ease of processing, and low cost. In this present study, the aim was to evaluate the usability of a raw clay source (Resadiye, Turkey) in the production of epoxy/clay nanocomposites and to investigate the effects of different surface modifiers. For this purpose, raw Namontmorillonite clay was first purified and then surface modified by using different types of a...
Utilization of (La1-xSrx)CoO3-δ/(La1-ySry)2CoO4±δ heterostructures as cathode for it-SOFCs Torunoğlu, Ziya Çağrı; Öztürk, Tayfur; Kalay, Yunus Eren; Department of Metallurgical and Materials Engineering (2017) Perovskite type ABO3 oxides have been studied as one of the promising candidates for the cathode of intermediate temperature (500-700 ˚C) solid oxide fuel cells (SOFCs). The one of the best one among them is (La1-xSrx)CoO3-δ (LSC113) in terms of SOFC cathode performance. However, LSC drastically suffers from strong chemical instability problem manifested as surface Strontium segregation, triggered by increasing operation temperature. Lowering temperature, on the other hand, blocks oxygen reduction performan...
Use of a natural mineral for the removal of copper and nickel from aqueous solutions to reduce heavy metal content of precipitation sludges Cagın, Volkan; Moralı, Nihan; İmamoğlu, İpek (2007-01-01) A major disadvantage of precipitation removal of heavy metals is the disposal of sludge having a high concentration of heavy metals, sometimes requiring disposal in hazardous waste landfills. A sorption based polishing step using natural sorbents; following precipitation may be feasible to avoid costly disposal of hazardous sludge. This study investigates the applicability of the use of a natural zeolite, namely clinoptilolite, obtained from a Western Anatolian deposit, in removing copper and nickel from aq...

Citation Formats

E. Dönertaş, E. Boyacı, A. E. Eroğlu, A. Çağır, and T. Shahwan, “Use of amino and mercapto functionalized silicate for sorption of Se(IV) and Se(VI),” 2009, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/78986.