Marmara-Boğazlar Sisteminde Yıllık Reaktif Toplam Azot ve FosforAkıları

2018-05-12
Tuğrul, Süleyman
Beken, Çolpan
Yüksek, Ahsen
Altıok, Hüsne
Beşiktepe, Şükrü Turan

Suggestions

Integrated 3-D finite element simulation of the Edremit geothermal system
Yoğurtçuoğlu, Alp; Karahanoğlu, Nurkan; Department of Geological Engineering (2016)
The Edremit Geothermal system consists of a shallow cold aquifer and a hot reservoir layer at depth. A 3-Dimensional Finite element model with 65596 nodes is used to simulate this system by an integrated algorithm in a 3 km by 3 km with 300 meters of depth study area consisting of currently operating geothermal field deep water wells. To determine the permeability values and hydraulic gradient values in the study area, a 2-Dimensional simulation was performed with 27664 nodes for the entire Edremit Basin, a...
Türk linyitlerinin biyolojik yolla sıvılaştırılması ve gazlaştırılması
Gökçay, Ferdi Celal(1993)
Linyitlerin yakılmaları sırasında ortaya çıkan hava kirliliğinin önlenebilmesi amacıyla bu araştırmada Ülkemizde geniş rezervlere sahip, yüksek kükürt içerikli ve düşük kalorili linyitlerden olan Elbistan, Çanakkale Çan ve Ankara-Beypazarı linyitlerinin biyolojik olarak çözündürülebilirliği ve daha sonra çözündürülen malzemenin karakterize edilerek yine biyolojik olarak gazlaştırılabilirliği araştırılmıştır. Yapılan deneysel çalışmalar sonucunda özellikle Elbistan linyitlerinin Phanerochaete chrysosporium a...
Evaluation of reservoir quality of the Derdere formation within the sequence stratigraphic framework in Diyarbakır region, SE Turkey
Yetim, Suzan Müge; Altıner, Demir; Department of Geological Engineering (2021-2-04)
An integrated sequence stratigraphic study based on well samples and well log data reveals the signals of eustatic sea level change during the Cenomanian-Turonian time interval in Diyarbakır, southeastern Turkey. The depositional model of the Derdere Formation based on detailed microfacies analysis is proposed as the carbonate ramp model consisting of inner ramp (tidal flat, lagoon and shoal), proximal middle ramp, distal middle ramp and outer ramp depositional settings. In the direction of east to west sev...
Material and heat balance calculations of eti-bakir plant by computer
Argyn, Aidar; Geveci, Ahmet; Department of Metallurgical and Materials Engineering (2008)
In this study the data taken from Outokumpu type Flash smelter of Eti-Bakır Plant (Samsun, Turkey) was used to write a computer program in Visual Basic with interface to Excel. Flash smelting is the pyrometallurgical process for smelting metal sulfide concentrates, used in Eti-Bakır plant. In this plant, copper flash smelting consists of blowing fine, dried copper sulfide concentrate mixtures, silica flux, lignite with air into the furnace and natural gas as main fuel. The molten matte is the principal prod...
Nehir Rejimindeki Açık Kanal Akımlarında Düşülerde Oluşan Yersel Enerji Kayıpları
Altan Sakarya, Ayşe Burcu; Tokyay, Nuray (null; 2007-09-10)
Citation Formats
S. Tuğrul, Ç. Beken, A. Yüksek, H. Altıok, and Ş. T. Beşiktepe, “Marmara-Boğazlar Sisteminde Yıllık Reaktif Toplam Azot ve FosforAkıları,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/79055.