A tracking resolver-to-digital converter

Download
001687.pdf
1987
Şahin, Ö Uğur
Show full item record
69
views
0
downloads
https://hdl.handle.net/11511/7962
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A current source converter based statcom for reactive power compensation at low voltage
Biçer, Nazan; Ermiş, Muammer; Department of Electrical and Electronics Engineering (2010)
This research work is devoted to the analysis, design and development of the Current-Source Converter (CSC) based distribution-type Static Synchronous Compensator (D-STATCOM) for low-voltage applications in reactive-power control in order to achieve i) faster transient response in reactive-power control, ii) lower current harmonic distortion, iii) lower power losses and iv) minimum storage elements in comparison with conventional solutions. The developed CSC-D-STATCOM includes a low-pass input filter and a ...
A 15-40-GHz Frequency Reconfigurable RF MEMS Phase Shifter
Ünlü, Mehmet; Demir, Şimşek; Akın, Tayfun (Institute of Electrical and Electronics Engineers (IEEE), 2013-08-01)
This paper presents a novel frequency reconfigurable phase shifter using the RF microelectromechanical systems (MEMS) technology. The phase shifter is based on the triple-stub circuit topology composed of three stubs that are connected by two transmission lines that are all implemented as distributed MEMS transmission lines. The insertion phase of the circuit is controlled by changing the electrical lengths of the stubs and the connecting transmission lines, while having ideally zero reflection coefficient ...
A switch mode power supply for producing half wave sine output
Kaya, İbrahim; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (2008)
In this thesis; analysis, design and implementation of a DC-DC converter with active clamp forward topology is presented. The main objective of this thesis is generating a rectified sinusoidal voltage at the output of the converter. This is accomplished by changing the reference signal of the converter. The converter output is applied to an inverter circuit in order to obtain sinusoidal waveform. The zero crossing points of the converter is detected and the inverter drive signals are generated in order to o...
A 35 GHz High Isolation RF MEMS SPDT Switch
Comart, Ilker; Çetintepe, Çağrı; Demir, Şimşek; Akın, Tayfun (2012-07-02)
A Low-power analog-to-digital converter integrated circuit for data acquisition applications
Koçak, Serhat; Akın, Tayfun; Department of Electrical and Electronics Engineering (2016)
Data acquisition systems have been used in different kinds of applications such as sensing applications, wireless communication, and healthcare. Each of these applications requires a different and unique system in order to achieve high quality acquisition. These different and unique systems employ various components such as analog-to-digital converters, digital-to-analog converters, and external electronics. Each of these components offers an optimal solution in order to satisfy the system requirements. Ana...
Citation Formats
Ö. U. Şahin, “A tracking resolver-to-digital converter,” Middle East Technical University, 1987.
METU IIS - Integrated Information Service open@metu.edu.tr