THE COMPARISON OF DIFFERENT FRAGILITY CURVE GENERATION TECHNIQUES TO ESTIMATE OBSERVED DAMAGE DISTRIBUTIONS

2018-06-18

Suggestions

Kırılganlık eğrileri kullanılarak elde edilen tahmini hasar dağılımının hasar tespit verileriyle karşılaştırılması
Çetin, Can; Erberik, Murat Altuğ (null; 2017-10-13)
Genellikle sismik risk değerlendirmelerinde kayıp ve hasarın tahmini için kullanılan kırılganlık eğrileri belirli bir ülke veya bölgede benzer özelliklere sahip yapı tipleri için oluşturulur. Bölgesel özellikleri esas alan kırılganlık eğrilerinin oluşturulması genel anlamda zor ve zahmetli bir iş olduğundan hasar ve kayıp tahminleri için çoğunlukla uluslararası çalışmalar sonucu oluşturulmuş mevcut kırılganlık eğrileri kullanılmaktadır. Oysa ülke veya bölge yapı stoğunu temsil etmeyen kırılganlık eğrilerini...
The estimation of uniaxial compressive strength conversion factor of trona and interbeds from point load tests and numerical modeling
Öztürk, Hasan (2017-07-01)
The point load (PL) test is generally used for estimation of uniaxial compressive strength (UCS) of rocks because of its economic advantages and simplicity in testing. If the PL index of a specimen is known, the UCS can be estimated using conversion factors. Several conversion factors have been proposed by various researchers and they are dependent upon the rock type. In the literature, conversion factors on different sedimentary, igneous and metamorphic rocks can be found, but no study exists on trona. In ...
The Interpretation of the Effective Connectivity Maps Obtained by Using Dynamic Bayesian Networks on EEG Data
Erkuş, Ekin Can; Ulusoy, İlkay (2016-01-01)
The main aim of this study was to compare and discuss the effective brain connectivity maps of dyslexic and control groups in terms of differences and similarities. The differences and sismilarities that may be found in the study, could provide information for the related future studies. There were total of 58 subjects which were 27 control and 31 dyslexics data in this study. All the data according to the groups were averaged with respect to time and group data were generated. Then, effective connectivity ...
The Prediction of Distortion of Blank Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operations
Şimşir, Caner; Hunkel, Martin; Lübben, Thomas; Hoffmann, Franz (2011-09-28)
The Prediction of Distortion of Case Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operation
Şimşir, Caner; Lütjens, Jörn; Rentsch, Rüdiger (2012-01-20)
Citation Formats
S. Karim Zadeh Naghshineh, A. Askan Gündoğan, M. A. Erberik, and A. Yakut, “THE COMPARISON OF DIFFERENT FRAGILITY CURVE GENERATION TECHNIQUES TO ESTIMATE OBSERVED DAMAGE DISTRIBUTIONS,” 2018, Accessed: 00, 2021. [Online]. Available: http://www.16ecee.org/.