EFFECT OF Ti ADDITION ON CYCLIC OXIDATIONBEHAVIOR OF FeAl INTERMETALLICS

Date

2017-01-01

Author

Yıldırım, Mehmet
Akdeniz, Mahmut Vedat
Mehrabov, Amdulla

Metadata

Show full item record

Item Usage Stats

88
views

0
downloads

URI

https://hdl.handle.net/11511/79775

Journal

Journal of Corrosion

Collections

Unverified, Article

Suggestions

OpenMETU
Core

Effect of Transition Metal Additions on B2-A2 Order-Disorder Phase Transition Temperature in B2 Type FeAl Intermetallic Compounds Yıldırım, Mehmet; Akdeniz, Mahmut Vedat; Mehrabov, Amdulla (null; 2008-12-01)
Effect of calcium carbonate addition on carbothermic formation of hexagonal boron nitride ÇAMURLU, HASAN ERDEM; SEVİNÇ, NACİ; Topkaya, Yavuz Ali (Elsevier BV, 2008-01-01) Effect of CaCO3 on formation of hexagonal boron nitride (h-BN) was investigated by holding CaCO3 free and CaCO3 added activated carbon-boric oxide mixtures under nitrogen atmosphere at 1500 degrees C for 30-120 min. Amount of CaCO3 addition was varied in the range of 0-50 wt.% of the initial mixture. Products were characterized by powder X-ray diffractometry, FT-IR analysis, quantitative chemical analysis, scanning electron microscopy and BET specific surface area analysis. It was observed that calcium carb...
Effect of mo additions on structural properties of B2-Type ordered FeAl intermetallics Yıldırım, Mehmet; Akdeniz, Mahmut Vedat; Mehrabov, Amdulla (2012-09-13)
Effect of cobalt doping on photocatalytic activity of lead titanate Odabaşı, Selda; Üner, Deniz; Department of Chemical Engineering (2018) The effect of cobalt doping on photocatalytic activity of lead titanate was studied by NO oxidation and TPx analyses. PbTiO3, Pb0.875Co0.125TiO3, Pb0.75Co0.25TiO3 and Pb0.5Co0.5TiO3 were synthesized by sol-gel method. Temperature programmed reduction and UV-desorption experiments were used to demonstrate the reducibility of TiO2, which is a commercial photocatalyst, 0.5 wt% Pt/TiO2 and synthesized perovskites under UV irradiation. By comparing the amount of hydrogen used to reduce fresh and UV treated sampl...
Effect of weld repair on microstructure and mechanical properties of API 5LX65 steel Batıgün, Caner; Demircan, M.; Gür, Cemil Hakan (null; 2010-12-01) Weld repair is a common technique to remove defects in the weldments. However, particularly in the high strength low alloy steels (HSLA), heat input during weld repair causes complex changes in the microstructure and mechanical properties. In this study, the influences of repeated heat input and thermal cycle upon repair weld on the microstructure and mechanical properties of the welded joints of API 5L X65 were investigated via optical microscopy, scanning electron microscopy; Charpy-V impact, Vickers hard...

Citation Formats

M. Yıldırım, M. V. Akdeniz, and A. Mehrabov, “EFFECT OF Ti ADDITION ON CYCLIC OXIDATIONBEHAVIOR OF FeAl INTERMETALLICS,” Journal of Corrosion, pp. 4–11, 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/79775.