ANALYSIS AND DESIGN OF VARIABLE PITCH TOOLS FOR THE IMPROVED PRODUCTIVITY

Date

2018-10-10

Author

Özşahin, Orkun

Metadata

Show full item record

Item Usage Stats

86
views

0
downloads

URI

https://hdl.handle.net/11511/80169

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Analysis and design of a compliant variable stroke mechanism TANIK, ENGİN; Söylemez, Eres (Elsevier BV, 2010-10-01) In this paper, analysis and design of an underactuated compliant variable stroke mechanism are presented by employing its pseudo-rigid-body model (PRBM). During the design two cases are considered: prescribed output loading and constant input torque. It is shown that this mechanism is suitable where variable stroke is required corresponding to variable output loading. It is also observed that this mechanism is capable of providing nearly constant force over a wide range of input. The analysis and design app...
Analysis and design of reactively loaded dual band microstrip antenna Bayram, Caner; Koç, Seyit Sencer; Department of Electrical and Electronics Engineering (2015) This thesis includes the design, production and measurement of a reactively loaded microstrip patch antenna. The dual band and circular polarization operation are achieved through the use of narrow slots etched close to the radiating edges on a nearly square patch. During the design process, the effects of antenna parameters on the input impedance and axial ratio characteristics are investigated. A step-by-step procedure is followed during the design process. First, the dual band characteristic is investiga...
Analysis and design of active annular ring coupled circular patch antenna Gebeşoğlu, Durmuş; Koç, Seyit Sencer; Department of Electrical and Electronics Engineering (2017) This thesis includes the design, production and measurement of the active, dual band annular ring coupled circular patch antenna. The dual band operation is achieved by using stacked patches. 3 dB hybrid is used to obtain circular polarization. Effects of antenna parameters on the input impedance and frequency ratio between the resonance frequencies are observed. Design has been achieved step by step. Firstly, dual band operation is investigated by using stacked patches. An annular ring antenna and a circul...
Analysis and prediction of filter cake washing Güçbilmez, Yeşim; Yılmaz, Levent; Department of Chemical Engineering (1999)
Analysis and design of induction heating work coils El-Fatallah, Ali; Ermiş, Muammer; Department of Electrical and Electronics Engineering (1988)

Citation Formats

O. Özşahin, “ANALYSIS AND DESIGN OF VARIABLE PITCH TOOLS FOR THE IMPROVED PRODUCTIVITY,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/80169.