Special Eccentrically Braced Steel Frame to Effectively Resist Seismic Loads

2007-06-26
Dicleli, Murat
Show full item record
37
views
0
downloads
https://hdl.handle.net/11511/80471
Proceedings of the 9th Canadian Conference on Earthquake Engineering
Proceedings of the 9th Canadian Conference on Earthquake Engineering, , (26 Haziran 2007,)
Department of Engineering Sciences, Conference / Seminar

Suggestions

Novel Reduced Switches Single-Phase to Three-Phase On-line Uninterruptible Power Supply
Sharifian, Mehrnaz; Niroomand, Mehdi (2011-09-10)
This paper describes design considerations and performance analysis of a novel on-line singlephase to three-phase uninterruptible power supply (UPS) with reduced number of switches. The proposed topology uses only 5 active switches reducing the cost of the system compared to the traditional 10-switch topologies. The proposed UPS consists of a single-phase rectifier/charger, a hvo-leg/three-phase inverter connected to load, battery hank, DC link capacitor and an AC inductor. Detailed circuit operation and an...
Fully Integrated Autonomous Interface With Maximum Power Point Tracking for Energy Harvesting TEGs With High Power Capacity
Tabrizi, Hamed Osouli; Jayaweera, Herath M. P. C.; Muhtaroglu, Ali (Institute of Electrical and Electronics Engineers (IEEE), 2020-05-01)
In this article, a novel fully autonomous and integrated power management interface circuit is introduced for energy harvesting using thermoelectric generators (TEGs) to supply power to Internet of Thing nodes. The circuit consists of a self-starting dc & x2013;dc converter based on a dual-phase charge pump with LC-tank oscillator, a digital MPPT unit, and a 1-V LDO regulator. The novel maximum power point tracking (MPPT) algorithm avoids open-circuit state, and accommodates varying input power and ultra-lo...
Supplemental Device to Improve the Performance of Seismic-Isolated Bridges in Near-Fault Zones
Dicleli, Murat (2008-07-13)
An Improved Range Proof with Base-3 Construction
Günsay, Esra; Onur, Cansu Betin; Cenk, Murat (2021-01-01)
Zero-knowledge protocols (ZKPs) allow a party to prove the validation of secret information to some other party without revealing any information about the secret itself. Appropriate, effective, and efficient use of cryptographic ZKPs contributes to many novel advances in real-world privacy-preserving frameworks. One of the most important type of cryptographic ZKPs is the zero-knowledge range proofs (ZKRPs). Such proofs have wide range of applications such as anonymous credentials, cryptocurrencies, e-cash ...
Optimum design of multistep spur gearbox
Öztürk, Fatih Mehmet; Department of Mechanical Engineering (2005)
Optimum design of multistep gearbox, since many high-performance power transmission applications (e.g., automotive, space industry) require compact volume, has become an important interest area. This design application includes more complicated problems that are not taken into account while designing single stage gear drives. Design applications are generally made by trial and error methods depending on the experience and the intuition of the designer. In this study, using Visual Basic 6.0, an interactive p...
Citation Formats
M. Dicleli, “Special Eccentrically Braced Steel Frame to Effectively Resist Seismic Loads,” presented at the Proceedings of the 9th Canadian Conference on Earthquake Engineering, , (26 Haziran 2007,), Ottawa, Kanada, 2007, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/80471.
METU IIS - Integrated Information Service open@metu.edu.tr