Vertically Aligned Carbon Nanotube Polyaniline Nanocomposite Electrodes for Supercapacitors

Date

2016-12-02

Author

Aydınlı, Alptekin
Yüksel, Recep
Ünalan, Hüsnü Emrah

Metadata

Show full item record

Item Usage Stats

35
views

0
downloads

URI

https://hdl.handle.net/11511/80632

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Vertically aligned carbon nanotube - Polyaniline nanocomposite supercapacitor electrodes Aydınlı, Alptekin; Ünalan, Hüsnü Emrah (2018-10-04) We develop a fast and cost effective method for the fabrication of a nanocomposite supercapacitor electrode. In this study aluminum foils were decorated with vertically aligned carbon nanotubes (VACNT) via chemical vapor deposition (CVD) method, which was followed by the electrodeposition of polyaniline (PANI) layer on top of the VACNTs. Electrochemical behavior of the fabricated nanocomposite electrodes were evaluated through cyclic voltammetry, galvanostatic charge discharge cycles and electrochemical imp...
Vertically aligned Si nanocrystals embedded in amorphous Si matrix prepared by inductively coupled plasma chemical vapor deposition (ICP-CVD) Nogay, G.; Saleh, Z. M.; Ozkol, E.; Toran, R. (2015-06-01) Vertically-aligned nanostructured silicon films are deposited at room temperature on p-type silicon wafers and glass substrates by inductively-coupled, plasma-enhanced chemical vapor deposition (ICPCVD). The nanocrystalline phase is achieved by reducing pressure and increasing RF power. The crystalline volume fraction (X-c) and the size of the nanocrystals increase with decreasing pressure at constant power. Columnar growth of nc-Si:H films is observed by high resolution transmission electron microscopy (HR...
Triangular Donor–Acceptor Systems Swager, Tımothy M.; Dengiz, Çağatay (2017-04-01)
Rectangular waveguide mode converters for creating monopulse radiation patterns Duman, Onurhan; Dural Ünver, Mevlüde Gülbin; Department of Electrical and Electronics Engineering (2018) For waveguide structures, there is an alternative way of creating three monopulse radiation patterns by using mode converters and radiating different waveguide modes (not only TE10 mode) for creating different monopulse radiation patterns. In the literature, different radiating modes are offered depending on waveguide shape. For rectangular waveguide, one suggestion is to radiate TE10 mode for the creation of sum channel radiation pattern, to radiate TE20 mode for the creation of azimuth difference radiatio...
Symmetrical and decoupled nickel microgyroscope on insulating substrate Alper, Se; Akın, Tayfun (Elsevier BV, 2004-09-21) This paper presents a symmetrical and decoupled surface micromachined gyroscope fabricated by electroforming thick nickel on a glass substrate. The symmetric structure allows matched resonant frequencies for the drive and sense vibration modes for improved sensitivity, while the decoupled drive and sense oscillation modes prevents unstable operation due to mechanical coupling, resulting in a low zero-rate output drift. The use of a glass substrate instead of a silicon substrate reduces noise due to the para...

Citation Formats

A. Aydınlı, R. Yüksel, and H. E. Ünalan, “Vertically Aligned Carbon Nanotube Polyaniline Nanocomposite Electrodes for Supercapacitors,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/80632.