Inspection of Strength Allocation in Torsionally Coupled Systems

2019-10-11
Kaatsız, Kaan
Sucuoğlu, Haluk
Fifth International Earthquake Engineering and Seismology Conference, 8 - 11 Ekim 2019

Suggestions

Evaluation of Motion Selection and Scaling for the Nonlinear Seismic Analysis of Concrete Gravity Dams
Soysal, Berat Feyza; Ay, Bekir Özer; Arıcı, Yalın (null; 2017-10-13)
The selection and scaling of the ground motions is usually the most effective factor determining the results of the safety assessment for concrete gravity dams. The guidelines for the nonlinear transient analyses of buildings, such as the one presented in ASCE/SEI-7-10, are generally applied to these structures. While these procedures are well-studied for the moment frames, their effectiveness and consistency has not been studied for gravity dam structures. The selection and scaling of the ground motions fo...
Evaluation of Inductance Measurement Methods for PM Machines
Ertan, Hulusi Bülent (2012-09-05)
For simulation purposes and developing controllers, accurate motor parameters are needed to successfully estimate motor performance. Plenty of research has been done on this issue. However, standard procedures are not established yet. This paper concentrates on the measurement of the most critical parameter for permanent magnet motors, namely motor inductances of such motors. Frequency dependence, current dependence and the effect of the power supply waveform on measurements are investigated. Tests are done...
Evaluation of circuit performance of arbitrary connected multiterminal microwave networks
Tünay, B. Gülsün; Toker, Canan; Department of Electrical and Electronics Engineering (1991)
Evaluation of Sparsity-based Methods for Parameterized Source Separation
Baskaya, Hasan Can; Öktem, Sevinç Figen (2020-10-07)
Parametric reconstruction problems arise in many areas such as array processing, wireless communication, source separation, and spectroscopy. In a parametric recovery problem, the unknown model parameters in each superimposed signal are estimated from noisy observations. Sparsity-based methods used in compressive sensing are also applied to parametric recovery problems. These methods discretize the parameter space to form a dictionary whose atoms correspond to candidate parameter values, represent the data ...
Evaluation of punching shear strength design and modelling approaches for slab-column connections
Zorlu, Merve; Binici, Barış; Department of Civil Engineering (2012)
Flat plate systems are constructed with slabs directly supported on columns. Since there are no beams in the system, the behavior of connections between the slabs and columns play a crucial role. Due to the sudden and brittle nature of punching shear failures, slab-column connection design must be conducted with proper safety precautions. The first part of this study aims to evaluate the safety level of different design expressions in the codes. Fir this purpose, the ability of ACI 318-11, TS-500 and Euroco...
Citation Formats
K. Kaatsız and H. Sucuoğlu, “Inspection of Strength Allocation in Torsionally Coupled Systems,” Ankara, Türkiye, 2019, p. 1, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/80938.