Comparison of corrosion products formed on black and corrosion resistant steel reinforcement embedded in cement paste

2012-09-09
Serdar, Marijana
Bjegovic, Dubravka
Akgül, Çağla
Monteiro, Paulo J M
Show full item record
34
views
0
downloads
https://hdl.handle.net/11511/81226
Eurocorr 2012-Safer world through better corrosion control, 9 - 13 Eylül 2012
Unverified, Conference / Seminar

Suggestions

Comparison of non-catalytic and catalytic ozonation processes of three different aqueous single dye solutions with respect to powder copper sulfide catalyst
Pirgalioglu, Saltuk; Ozbelge, Tuelay A. (2009-07-01)
Treatment of textile wastewaters containing dyes has not been very successful by conventional methods such as biological treatment. In order to overcome this problem, ozonation based on the oxidation of organic pollutants has been studied by researchers. Catalytic ozonation and advanced oxidation processes (ACPs) are used in order to increase the efficiency of sole ozonation further. In this work, catalytic ozonation in the presence of copper sulfide (CuS) powder as a catalyst was investigated in the treatm...
Comparison of different nitrate removal methods in groundwater
Tuna Öztürk, Eda; YİĞİT AVDAN, ZEHRA (2013-12-21)
Comparison of damage mechanisms in curved composite laminates under static and fatigue loading
Tasdemir, B.; Çöker, Demirkan (Elsevier BV, 2019-04-01)
In this paper, damage progression in curved CFRP composite laminates are experimentally investigated for static and fatigue loadings. Two different cross-ply laminate thicknesses are examined with grouped plies to elucidate the failure mechanisms. A test fixture is designed to apply moment/axial combined loading to curved specimens and DIC method is used to obtain the strain distribution in the curved region until failure. Our major finding is that under fatigue loading, the failure location and mechanism a...
Comparison of test methods on the compressive strength of fly ash blended cements /
Tunç, Hasan; Yaman, İsmail Özgür; Tokyay, Mustafa; Department of Civil Engineering (2014)
In Turkey the compressive strength of cements are determined according to TS EN 196-1. That standard suggests the use of a constant water-cement ratio of 0.50 in preparation of mortar specimens for all types of cements. On the other hand, in USA cement producers use ASTM C 109 to determine the compressive strength of cements, which is based on a constant consistency of cement mortars for blended cements only. The main difference of these methods is the needed amount of water to produce cement mortar. When a...
Comparison of BPN Igniter Compositions Containing Micron and Nano Sized Boron Particles
Koç, Suzan; Ulaş, Abdullah (2015-08-03)
Citation Formats
M. Serdar, D. Bjegovic, Ç. Akgül, and P. J. M. Monteiro, “Comparison of corrosion products formed on black and corrosion resistant steel reinforcement embedded in cement paste,” presented at the Eurocorr 2012-Safer world through better corrosion control, 9 - 13 Eylül 2012, İstanbul, Türkiye, 2012, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/81226.
METU IIS - Integrated Information Service open@metu.edu.tr