Effects of Annealing and Heavy Ion Irradiation on the Mechanical Properties of AlSc Alloys

2017-04-21
Verma, Nisha
Özerinç, Sezer
Averback, Robert
Kim, Sungeun
Show full item record
76
views
0
downloads
https://mrsspring.zerista.com/event/member/362670
https://hdl.handle.net/11511/81593
Unverified, Conference / Seminar

Suggestions

Effects of Graphene Transfer and Thermal Annealing on Anticorrosive Properties of Stainless Steel
Oh, Jeong Hyeon; Han, Sangmok; Kim, Tae-Yoon; PARK, JONGEE; Öztürk, Abdullah; Kim, Soo Young (2017-11-01)
Stainless steel (STS) films were annealed in a thermal quartz tube and covered with graphene to improve their anticorrosive properties. Graphene was synthesized via the chemical vapor deposition method and transferred onto the surface of the STS film by the layer-by-layer approach. The structure of the STS film changed from alpha-Fe to gamma-Fe after annealing at 700 C for 1 h, resulting in an increase of 82.72% in the inhibition efficiency. However, one-layer graphene acted as a conductive pathway and ther...
Effects of Annealing on the Structure and Mechanical Properties of 3D Printed PLA Components
Aydın, Sencer; Yaman, Ulaş; Özerinç, Sezer (null; 2018-11-09)
We investigated the effects of annealing on the crystallinity and mechanical properties of 3D-printed PLA specimens. Specimens with a dog-bone geometry for tensile testing were prepared by fused deposition modeling using a commercial PLA filament. The specimens were annealed at different temperatures in the range 80°C – 120°C fordifferent durations (60 minutes–24 hours) in dry nitrogen environment. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) characterized the crystallinity and the st...
Effects of injection molding conditions on the mechanical properties of polyamide/glass fiber composites
Cansever, Cahit Can; Yılmazer, Ülkü; Department of Polymer Science and Technology (2007)
In this study, effect of injection molding process parameters on fiber length and on mechanical properties of Polyamide-6 / glass fiber composite were investigated to produce higher performance composites. Polyamide-6 was first compounded with an E-grade glass fiber in a co-rotating intermeshing twin screw extruder. Then, by using this composite, twenty-five types of experiments were performed by injection molding by changing the barrel temperature, injection pressure, hold pressure, mold temperature, cooli...
Effects of oxidative functionalization and aminosilanization of carbon nanotubes on the mechanical and thermal properties of polyamide 6 nanocomposites
Kaynak, Cevdet (SAGE Publications, 2013-11-13)
The focus of this study is to investigate the effects of oxidative functionalized carbon nanotubes (f-CNTs) and aminosilanized carbon nanotubes (s-CNTs) on the mechanical and thermal properties of polyamide 6 nanocomposites. Oxidation of nanotube surfaces was conducted with sulfuric acid/nitric acid mixture and then aminosilanization was carried out with -aminopropyltriethoxysilane. Nanocomposites were compounded by melt mixing technique and shaped by injection molding. Scanning electron microscopy images r...
Effects of resterilization on mechanical properties of polypropylene meshes
Serbetci, Kemal; Kulacoglu, Hakan; Devay, Ali Onder; Hasırcı, Nesrin (2007-09-01)
Background: The re-use of sterile packaged polypropylene meshes in hernia surgery is not recommended by the manufacturers. However, especially in developing and underdeveloped countries, many surgeons are obliged to re-use the mesh pieces after resterilization because of economic problems. The purpose of this study was to determine the effects of ethylene oxide and autoclave resterilization on the mechanical properties of polypropylene meshes.
Citation Formats
N. Verma, S. Özerinç, R. Averback, and S. Kim, “Effects of Annealing and Heavy Ion Irradiation on the Mechanical Properties of AlSc Alloys,” 2017, Accessed: 00, 2021. [Online]. Available: https://mrsspring.zerista.com/event/member/362670.
METU IIS - Integrated Information Service open@metu.edu.tr