Design and Analyses of an Unmanned Aerial Vehicle Hybrid Trailing Edge Control Surface Having Camber and Decamber Capabilities

Date

2015-09-10

Author

İlhan Ozan, Tunçöz
Yosheph, Yang
Gürses, Ercan
Şahin, Melin
Özgen, Serkan
Yaman, Yavuz

Metadata

Show full item record

Item Usage Stats

35
views

0
downloads

URI

https://hdl.handle.net/11511/81837

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

Design and Analysis of an Unmanned Aerial Vehicle Hybrid Trailing Edge Control Surface Having Camber and Decamber Capabilities Topaç, Ömer Tanay; Taşdemir, Burcu; Gürses, Ercan; Çöker, Demirkan (2015-09-12) This paper presents the design and analyses of an unmanned aerial vehicle hybrid trailing edge control surface having camber and decamber capabilities. Initially, a brief introductory information were given about morphing concepts. Then, the structural design and analyses in in-vacuo condition are presented. The aerodynamic loadings were calculated at the morphed configurations, and these loads were transferred to the structural mesh in order to assess the design capability under the aerodynamic loading. It...
Design and Analysis of a Lightweight Disc-Type Magnetorheological Device Topcu, Okan; TAŞCIOĞLU, YİĞİT; Konukseven, Erhan İlhan (2015-07-03) The focus of this paper is the weight reduction of a disc-type magnetorheological (MR) device. Two different designs are proposed and investigated via finite-element analysis (FEA) to achieve the optimum combination of design parameters that result in the highest torque-to-mass ratio. The FEA is performed using the non-commercial FEMM package. Due to the symmetrical structure of the device, a 2D-axisymmetric model is utilized to simulate the magnetic flux density distribution. The resistant torque calculati...
Design and analysis of a mode-switching micro unmanned aerial vehicle Cakici, Ferit; Leblebicioğlu, Mehmet Kemal (SAGE Publications, 2016-12-01) In this study, design and analysis of a mode-switching vertical take-off and landing (VTOL) unmanned aerial vehicle (UAV) with level flight capability is considered. The design of the platform includes both multirotor and fixed-wing (FW) conventional airplane structures; therefore named as VTOL-FW. The aircraft is modeled using aerodynamical principles including post-stall conditions. Trim conditions are obtained by solving constrained optimization problems. Linear analysis techniques are utilized for trim ...
Design and analysis of a VTOL Tilt-Wing UAV Çakır, Hasan; Kurtuluş, Dilek Funda; Department of Aerospace Engineering (2020) In this study, the design and analysis of a UAV, which is capable of vertical take-off and landing using fixed six rotors placed on the tilt-wing and tilt-tail, will be explained. The aircraft has four rotors on its wing and two rotors on its tail. The main wing and horizontal tail are capable of 90° tilting. Both aerodynamic and thrust forces are used during VTOL, transition, and forward flight. Aerodynamic analysis has been performed in ANSYS Fluent v.18. A non-linear six DoF model, involving a 3D CAD mod...
Design and analysis of fixed load crushable column type energy absorbing mechanism for a helicopter seat Öztürk, Gülce; Kayran, Altan; Department of Aerospace Engineering (2018) Crashworthiness is the survivability of occupants inside a vehicle during a crash. In helicopters, crashworthiness is ensured by three subsystems; the landing gear, floor structure and the seats. Because of the critical role of the seats in helicopter crashworthiness evaluation, dynamic performance of the seat has to be studied in depth. There are different regulations in which requirements of survivable loads and crash conditions are defined. In this respect, a seat that is used in helicopter should be cer...

Citation Formats

T. İlhan Ozan, Y. Yosheph, E. Gürses, M. Şahin, S. Özgen, and Y. Yaman, “Design and Analyses of an Unmanned Aerial Vehicle Hybrid Trailing Edge Control Surface Having Camber and Decamber Capabilities,” 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/81837.