Effects of Mo, W, Nb additions and heat treatments on thermal and magnetic properties of Fe-Co-B based bulk metallic glass alloys produced centrifugal casting

Date

2010-04-25

Author

Küçük, İlker
Aykol, Muratahan
Yıldırım, Mehmet
Akdeniz, Mahmut Vedat
Mehrabov, Amdulla

Metadata

Show full item record

Item Usage Stats

49
views

0
downloads

URI

https://hdl.handle.net/11511/81892

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Effects of processing parameters on mechanical and thermal properties of glass mat reinforced nylon 6 composites Akkaoui, W; Bayram, Göknur (SAGE Publications, 2004-01-01) Nylon 6 (PA6)/Glass Mat (GM) composites and pure PA6 were prepared by compression molding technique and the effects of molding temperature, pressure application time and GM content on the final properties of the materials were investigated. At each temperature and pressure application time, the composite with one layer GM had higher tensile strength, tensile modulus but lower % elongation at break than neat PA6. Processing parameters did not significantly influence the tensile behavior of the pure PA6 and P...
Effects of synthesis, doping methods and metal content on thermoluminescence glow curves of lithium tetraborate Kayhan, Mehmet; Yılmaz, Ayşen (Elsevier BV, 2011-07-28) Lithium tetraborate: Li(2)B(4)O(7), (LTB) has been synthesized and doped with various Mn content by different methods, such as, high temperature solid state synthesis and solution assisted synthesis methods. Powder XRD results proved the formation of solid-solution by replacing Mn with Li ions in LTB lattice at lower amount of Mn doping, for example 0.1-3.0% Mn doping. In this research TL glow curves of Mn doped lithium tetraborate (LTB: Mn) produced by using different synthesis and doping methods and the e...
Effects of pozzolanic additions on grindability and some mechanical properties of pozzolanic cements of different fineness values Erdogdu, Korhan; Tokyay, Mustafa; Department of Civil Engineering (1996)
Effects of synthesis and doping methods on thermoluminescence glow curves of manganese doped lithium tetraborate Kayhan, Mehmet; Yılmaz, Ayşen; Department of Chemistry (2009) In this study, differences in glow curves of Mn doped LTB powder samples synthesized with solid and wet synthesis methods and doped by using solid and wet doping techniques were investigated. Firstly, LTB was synthesized by using wet synthesis method which mainly comprises dissolution of reactants in water as solvent. Second way to produce LTB which was used in this study was solid synthesis method. In solid synthesis method, reactants were mixed in powder form. In the second part of the study, LTB produced...
Effects of Al and Fe additions on microstructure and mechanical properties of SnAgCu eutectic lead-free solders KANTARCIOGLU, A.; Kalay, Yunus Eren (2014-01-21) In this study, Sn-3.5Ag-0.9Cu (wt%) lead-free solder was modified with minor additions of Al and Fe. The thermal, microstructural and mechanical behaviors after and before compositional modifications were investigated by a combined study of differential scanning calorimetry (DSC), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and shear strength measurements. EDS results and Darken-Gurry predictions indicated a high concentration of Fe substitution within the Cu6Sn5 at the solder/c...

Citation Formats

İ. Küçük, M. Aykol, M. Yıldırım, M. V. Akdeniz, and A. Mehrabov, “Effects of Mo, W, Nb additions and heat treatments on thermal and magnetic properties of Fe-Co-B based bulk metallic glass alloys produced centrifugal casting,” 2010, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/81892.