Design and Cold Flow Experimental Procedure of a Pintle Injector

2018-07-03
Erkal, Berksu
Aksel, Mehmet Haluk
Show full item record
57
views
0
downloads
https://hdl.handle.net/11511/82049
Unverified, Conference / Seminar

Suggestions

Design and thermo-mechanical analysis of warm forging process and dies
Saraç, Sevgi; Gökler, Mustafa İlhan; Department of Mechanical Engineering (2007)
Forging temperature is one of the basic considerations in forging processes. In warm forging, the metals are forged at temperatures about the recrystallization temperature and below the traditional hot forging temperature. Warm forging has many advantages when compared to hot and cold forging. Accuracy and surface finish of the parts is improved compared to hot forging while ductility is increased and forming loads are reduced when compared to cold forging. In this study, forging process of a part which is ...
Design and electromagnetic optimization of a respiration harvester
Goreke, Utku; Azgın, Kıvanç; Beyaz, Mustafa Ilker (2014-09-10)
This work reports the design and electromagnetic optimization of a MEMS-scale turbo generator for harvesting fluidic energy in human exhalation. The device is composed of a turbine with dual -layer integrated permanent magnets, ball bearings, and stators with micro coils. For an efficient energy conversion, number of magnetic poles should be optimized to obtain maximum flux density in a given device geometry, where magnetic reluctance and leakage act as two competing effects. This optimization has been perf...
Design and microfabrication of annular concentric capacitive micromachined ultrasonic trancducer
Sharif, Parisa; Bayram, Barış; Department of Micro and Nanotechnology (2014)
In this thesis, a novel concentric annular CMUT design has been fully designed. All design parameters are determined based on the analytical expressions based on CMUT theory. Each CMUT design consists of 4 concentric disc-shaped elements, having equal membrane areas. Each element features hexagonal CMUT cells having side lengths of 50 μm up to 80 μm. The CMUT design features fully-metallized membranes for robust operation. The novel CMUT design presented in this thesis is a state-of-the-art design based on ...
Design and spice simulation of a thyristorized medium frequency current fed inverter
Demirtürk, Yüksel; Ertan, H. Bülent; Department of Electrical and Electronics Engineering (1989)
Design and qualification of a semi-anechoic chamber and ınvestigation into noise characteristics of a vacuum vleaner
Kayhan, Cihan; Eralp, O. Cahit; Department of Mechanical Engineering (2008)
In this study a centrifugal fan is studied for noise characteristics and measurements in a semi- anechoic room. A semi-anechoic room is constructed inside Fluid Mechanics Laboratory of Mechanical Engineering Department has been qualified with respect to ISO 3745 standard. The fan characteristic is obtained as proposed in AMCA standards 210-75, by simply measuring the voltage and current of the motor during operation and calculating the power consumption of the assembly. Noise measurements are taken using tw...
Citation Formats
B. Erkal and M. H. Aksel, “Design and Cold Flow Experimental Procedure of a Pintle Injector,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/82049.
METU IIS - Integrated Information Service open@metu.edu.tr