Numerical Investigation of Long-Term Beach Evolution Around Shore-Normal Groins Using XBeach

Date

2016-11-20

Author

Söğüt, Erdinç
Baykal, Cüneyt
Güler, Işıkhan
Ergin, Ayşen
Demirci, Ebru

Metadata

Show full item record

Item Usage Stats

166
views

0
downloads

URI

https://hdl.handle.net/11511/82350

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Numerical Study of High Velocity Impact Response of Veicle Armor Combination Using LS DYNA Başaran, Güralp; Gürses, Ercan (null; 2017-05-09) The aim of this work is to perceive if the outcome from a ballistic impact can be predicted beforehand with the help of material testing and finite element simulations. Use of refined numerical simulation are gaining more importance especially in extreme load cases. A numerical investigation of the ballistic performance of monolithic, double layered metallic plates made of either steel or aluminium or combinations ,were impacted by a 7.62-mm APM2 projectile at a velocity of 820m/s. The numerica...
Numerical investigation of a Hawkmoth wing undergoing pure plunge motion in hover Bektaş, Mürvet; Güler, Mehmet Ali; Kurtuluş, Dilek Funda (2019-09-20) The aerodynamic phenomena of the flapping motion in hover mode is widely considered in micro air vehicle (MAV) applications. In this study, the aerodynamics of a three-dimensional rigid wing mimicked from the hawkmoth Manduca sexta is numerically investigated under pure plunge motion. The sinusoidal motion is provided with a user-defined function (UDF) to flap the wing, and the computational fluid dynamics (CFD) is used for the numerical analysis. This paper presents the effects of various parameters such a...
Numerical investigation of wind load characteristics around an isolated tall building Demirbaş, Gökalp Doğukan; Köken, Mete; Kurç, Özgür; Department of Civil Engineering (2021-2-10) As a common practice, wind loads on tall buildings are calculated using empirical formulas with several assumptions described within Turkish Standards: TS498 and TS EN 1991-1-4. Since these standards are mainly based on past site experiences and wind tunnel tests, these formulas become invalid with distinctive designs and the increase in the building height. With the development of computer technology, computational fluid dynamics (CFD) tools have become common in calculating wind loads on tall buildings. W...
Numerical modeling of short term morphological changes around coastal structures and at the river mouths Demirci, Ebru; Baykal, Cüneyt; Güler, Işıkhan; Department of Civil Engineering (2016) In this study, XBeach, a two dimensional depth averaged numerical model developed mainly for simulating nearshore hydro- and morphodynamics is applied to two case studies; i) laboratory experiments on short-term morphological changes around a detached breakwater and a T-groin and ii) a fluvial dominated coastal flooding event at the Manavgat river mouth between dates, 4th and 15th December, 1998. In the first part of study, the numerical model is calibrated for the wave, current and bottom evolution conditi...
Numerical investigation of flow around an isolated spur dike in a curved channel Budak, Ezgi; Köken, Mete; Department of Civil Engineering (2017) Secondary currents generated by meanders of the rivers cause scour along the outer bank of the rivers if the bed material is erodible. For this kind of rivers spur dikes are located along the outer reach where they regulate the flow and prevent erosion of the outer bank. In a highly curved channel several streamwise oriented vortices form within the bending section. However, presence of a spur dike causes the formation of some additional coherent structures such as horseshoe vortices and wake vortices. In f...

Citation Formats

E. Söğüt, C. Baykal, I. Güler, A. Ergin, and E. Demirci, “Numerical Investigation of Long-Term Beach Evolution Around Shore-Normal Groins Using XBeach,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/82350.