The effect of lithium amount on electrochemicaland structural characteristics ofLix(Ni0.80Co0.15Al0.05)O2 cathode activematerials for lithium-ion batteries

Date

2017-09-26

Author

Savas Uygur, Cansu
Pişkin, Berke
Aydınol, Mehmet Kadri

Metadata

Show full item record

Item Usage Stats

125
views

0
downloads

URI

https://hdl.handle.net/11511/82400

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

The Effects of heat treatment on microstructure, hardness and fatigue behavior of (AMS5659) 15-5 precipitation hardenable stainless steel Gören, Şahin; Gürbüz, Rıza; Department of Metallurgical and Materials Engineering (2018) In this study, effects of heat treatment parameters on microstructure, hardness and fatigue behavior of 15-5 precipitation hardenable stainless steels have been examined. Heat treatments have been conducted in three different steps homogenization, solutionizing and aging treatment at different temperatures and times. Microstructural analysis in terms of grain size and chemical composition analysis have been performed by optical and scanning electron microscope (SEM). Then, hardness measurements were applied...
The Effect of electroslag remelting (ESR) process on mechanical properties and microstructural cleanless of gun-barrel steels Öztürk, Ahmet Sedat; Tekin, Erdoğan; Department of Metallurgical and Materials Engineering (1997)
The effect of hot-deformation on mechanical properties and age hardening characteristics of Al-Mg-Si based wought aluminum alloys Tan, Evren; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2006) Microstructural and mechanical characterizations of heat treatable Al-Mg-Si-Cu based wrought aluminum alloys have been studied. The aim of this work was to produce fine grained, high strength alloy by adjusting processing conditions: deformation, solutionizing and aging. First, primary characterization was carried out via SEM-EDS analyses and tensile tests. Then an extensive experimental study has been carried out on two sets of samples. The first set has been studied to determine the ideal conditions for s...
The Effect of retained austenite and carbide distribution on the wear resistance of bearing steel Özgeneci, Zeren; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2017) This study aims to investigate the effect of the amount of retained austenite and undissolved carbides on the wear resistance of the heat treated bearing steels. As inner and outer ring material 100Cr6 steel grade was used. The specimens were austenitized in the range 800°C to 1000°C, and then, quenched to room temperature in oil to produce a hard martensitic phase. A composite microstructure of undissolved carbides, martensite and retained austenite were observed in hardened steel specimens. It was seen th...
The effect of Cu and austempering treatment parameters on the impact toughness and hardness of ductile cast iron Yaşar, Hakan; Tekin, Erdoğan; Department of Metallurgical Engineering (1994)

Citation Formats

C. Savas Uygur, B. Pişkin, and M. K. Aydınol, “The effect of lithium amount on electrochemicaland structural characteristics ofLix(Ni0.80Co0.15Al0.05)O2 cathode activematerials for lithium-ion batteries,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/82400.