Processing Characterization of Textured Barium Ferrite Ceramics

Date

2012-09-15

Author

Kaya, Seray
Aydoğan Güngör, Eda
Dericioğlu, Arcan Fehmi

Metadata

Show full item record

Item Usage Stats

27
views

0
downloads

URI

https://hdl.handle.net/11511/83027

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Processing and characterization of high density tungsten-nickel-iron alloys Çalışkan, Necmettin Kaan; Bor, Şakir; Durlu, Nuri; Department of Metallurgical and Materials Engineering (2013) In the present study, processing of W-Ni-Fe alloys by liquid phase sintering technique has been investigated. Effect of sintering atmospheres (hydrogen and vacuum), tungsten content altering from 90 to 97 wt.%, Ni/Fe ratio varied from 2 to 4 and post sintering treatments (heat treatment and swaging) on the microstructure and mechanical properties of W-Ni-Fe alloys have been analyzed. Liquid phase sintered alloys were characterized by mechanical tests, electron microscopy and XRD studies, thermal analyses an...
Processing optimization of SiO2-capped aluminum-doped ZnO thin films for transparent heater and near-infrared reflecting applications Can, Hilal Aybike; Tonbul, Beyza; PİŞKİN, FATİH; Öztürk, Tayfur; AKYILDIZ, HASAN (2021-01-01) In this study, a series of optimization steps were performed in the production of Al-doped ZnO (AZO) thin films to tailor their properties as efficient transparent heaters and for near-infrared (NIR) reflectance. The films were produced on 50 x 75 mm(2) glass substrates via magnetron sputtering and capped with a protective SiO2 layer. Processing parameters such as deposition temperature, film thickness, and annealing conditions were all optimized in terms of structure, morphology, optical/electrical propert...
Processing optimization of SiO2-capped aluminum-doped ZnO and amorphous In-Zn-Sn-Oxide thin films for transparent heater and near-infrared reflecting applications Can, Hilal Aybike; Öztürk, Tayfur; Akyıldız, Hasan; Department of Metallurgical and Materials Engineering (2022-2-09) In this study, AZO/SiO2 and amorphous In-Zn-Sn-oxide (a-ZITO) functional coatings were developed with combinatorial approach for transparent heater and heat reflecting applications. AZO/SiO2 and amorphous In-Zn-Sn-oxide (a-ZITO) coatings were obtained via magnetron sputtering. A series of optimization steps were carried out specific to each method and coating type. The samples were produced on 75x50 mm2 glass substrates. Further, optimum post-deposition annealing conditions were identified as 400 °C and Ar+...
Processing and characterization of brick-and-mortar structured bulk bio-inspired composites Gürbüz, Selen Nimet; Dericioğlu, Arcan Fehmi; Department of Metallurgical and Materials Engineering (2013) The aim of this study was to fabricate inorganic-organic composites with an architecture resembling to natural nacre using a novel hybrid conventional method called Hot-Press Assisted Slip Casting (HASC). Alumina platelets, glass platelets and glass flakes with different aspect ratios were used as two-dimensional inorganic fillers to reinforce epoxy matrix. Correlation between processing parameters, inorganic content, orientation of the two-dimensional reinforcements and mechanical property enhancement of t...
Processing and characterization of textured barium ferrite ceramics Aydoğan, Eda; Dericioğlu, Arcan Fehmi; Timuçin, Muharrem; Department of Metallurgical and Materials Engineering (2012) Technological advances results in the fact that quite a large number of electronic equipment interacts with its environment leading to the malfunction of the devices. This brings about the necessity of using proper electromagnetic (EM) wave absorbers/shields to avoid such interactions. In order to absorb EM waves in a large frequency band from several MHz to GHz, barium hexaferrite (BaHF) ceramics which are produced as textured ceramics as well as in multilayered form can be used. Textured ceramics are proc...

Citation Formats

S. Kaya, E. Aydoğan Güngör, and A. F. Dericioğlu, “Processing Characterization of Textured Barium Ferrite Ceramics,” 2012, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/83027.