Effects of Mo and W on soft magnetic properties of melt-spun Fe-Co-B-Si-Mo-W amorphous ribbons

Date

2010-04-25

Author

Küçük, İlker
Uzun, Orhan
Aykol, Muratahan
Duman, Nagehan
Mehrabov, Amdulla
Yılmaz, Fikret
Akdeniz, Mahmut Vedat

Metadata

Show full item record

Item Usage Stats

58
views

0
downloads

URI

https://hdl.handle.net/11511/83091

Conference Name

International Conference on Superconductivity and Magnetism ICSM-2010 (25 - 30 Nisan 2010)

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

EFFECTS OF COPPER ELECTROPLATING PARAMETERS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Al-Cu BRAZED JOINTS Özdemir, Ayşe; Karakaya, İshak; Department of Metallurgical and Materials Engineering (2022-12-02) Almost 25, 50 and 75 microns of copper were deposited on aluminum alloys by using copper sulfate and copper pyrophosphate baths. And also, 20, 40 and 60 mA/cm2 current density were applied during electroplating process. After electroplating process, copper deposited aluminum pieces were brazed at 570℃ for 15 minutes by using furnace brazing in the first part of study. Shear test were applied to samples and strength of the joint which was brazed with sample that had 75 microns thickness coated at 60 mA/cm2 c...
Effects of Fe-tib2 addition on the liquid phase sintering of behavior of tungsten carbide cermets Tankut, Aydın; Timuçin, Muharrem; Department of Metallurgical and Materials Engineering (2003)
Effects of tail states on the conduction mechanisms in silicon carbide thin films with high carbon content SEL, KIVANÇ; AKAOĞLU, BARIŞ; Atilgan, Ismail; Katircioglu, Bayram (Elsevier BV, 2011-03-01) Hydrogenated amorphous silicon carbide (a-SiCx:H) films of different carbon content (x) were deposited by radio frequency plasma enhanced chemical vapor deposition (PECVD) system. Apart from the X-ray photoelectron spectroscopy (XPS) and UV-Visible transmission analyses, the resistivity measurements between 293 K and 450 K were emphasized to assess the eventual transport mechanisms. The film resistivities are unexpectedly found relatively low, especially for high carbon content. In the frame of exclusive ba...
Effects of annealing on electrical resistivity of aluminum thin films Güler (Yaroğlu), Hüsniye; Özenbaş, A. Macit; Department of Metallurgical Engineering (1990)
Effects of boron compounds on thermal degradation behaviour of polymers involving ester linkages Çetinkaya, Nezaket Nehir; Hacaloğlu, Jale; Kaynak, Cevdet; Department of Polymer Science and Technology (2021-2-10) Interest in polymer nanocomposites is growing exponentially across various scientific and engineering disciplines owing to their remarkable improvements in theirproperties compared to micro-and macro-conventional composites. Although polymers having good physical properties are commercially available, they are mostly hampered by their low melting temperatures, poor mechanical or barrier properties. Therefore, there is a considerable work on improvement of the proper...

Citation Formats

İ. Küçük et al., “Effects of Mo and W on soft magnetic properties of melt-spun Fe-Co-B-Si-Mo-W amorphous ribbons,” presented at the International Conference on Superconductivity and Magnetism ICSM-2010 (25 - 30 Nisan 2010), Antalya, Türkiye, 2010, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/83091.