Design of Ohmic Heating Processes

Date

2012-01-01

Author

Şensoy, İlkay

Metadata

Show full item record

Item Usage Stats

122
views

0
downloads

URI

https://hdl.handle.net/11511/83447
https://onlinelibrary.wiley.com/doi/pdf/10.1002/9781444398274.ch36

Relation

Handbook of Food Process Design

Collections

Department of Food Engineering, Book / Book chapter

Suggestions

OpenMETU
Core

Design of wideband impedance transformers Demir, S (2003-10-01) Although design methods of wideband impedance transformers are known, in some cases there can be limitations on implementation. A practical limitation is the availability of the required characteristic impedance levels, particularly in antenna array feed structures.
Design of Selective Linear Phase Cross-Coupled Dielectric Resonator Filters Ozturk, Onur Ozan; Oruc, Sacid; Alicioglu, Bulent; Yıldırım, Nevzat (2018-11-02) In this paper, a highly selective linear phase filter is designed and implemented in cross-coupled form using dielectric resonators in Ku band to be used as a channel filter in IMUX of a satellite receiver. Extreme delay flatness is required: 1.5 nS delay ripple over 60 % of the passband and 12 nS near the band edges. The initial design is carried out as 10 resonator symmetric cross-coupled filter with all ideal inverter couplings realizing two finite transmission zeros (FTZ) satisfying also the delay flatn...
Design of selective linear phase cross-coupled dielectric resonator filters Öztürk, Onur Ozan; Dural Ünver, Mevlüde Gülbin; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2018) In this work, a selective linear phase filter is designed in cross-coupled form using dielectric resonators in Ku band to be used as a channel filter in IMUX of a satellite receiver. Extreme delay flatness is required: 1.5ns delay ripple over 60 % of the passband and symmetric cross-coupled filter with all ideal inverter couplings realizing four finite transmission zeros (FTZ) satisfying also the delay flatness requirements. Design is carried out on the software program FILPRO, then optimized in ADSTM and t...
Design of microwave voltage controlled oscillators using MMIC technology Birdir, S Cüneyt; Günalp, Nilgün; Department of Electrical and Electronics Engineering (1994)
Design of automatic tool changer for CNC machines Koç, Murat Bilgin; Gökler, Mustafa İlhan; Department of Mechanical Engineering (1995)

Citation Formats

İ. Şensoy, Design of Ohmic Heating Processes. 2012, p. 1077.