Koni kesitleri ve koni kesitlerinin tarihsel gelişimi

2013-01-01
Alacacı, Cengiz
Erbaş, Ayhan Kürşat
Çetinkaya, Bülent
Show full item record
62
views
0
downloads
https://hdl.handle.net/11511/83580
Department of Mathematics and Science Education, Book / Book chapter

Suggestions

Characterization of local flow behaviour in conical spouted beds
Yeniçeri, Ali; Külah, Görkem; Department of Chemical Engineering (2019)
Conical spouted beds are used in various physical and chemical applications such as drying, coating, and pyrolysis of waste plastic and biomass owing to their effective feature of gas-solid contact. To design and operate these units in high efficiency, a complete understanding of the phenomena and detailed investigation of local flow structure are of paramount importance. In this study, the effects of bed design parameters (unit size, conical angle, spouting gas-inlet diameter) and operational conditions (p...
Cpt based compressibility assessment of soils
Özkahriman, Fatma; Çetin, Kemal Önder; Department of Civil Engineering (2004)
One of the most critical problems geotechnical engineers face with is the determination of the amount of consolidation settlement that will occur at a site as a result of the construction of a structure. The compressibility behavior of the soil is an important parameter in determining the amount of consolidation settlement. The goal of this study is to develop probabilistically based correlation between the compressibility behavior of soil and in-situ test data. Within the scope of this research effort, per...
Determination of minimum doubler length for tapered sandwich structures
Altun, Aslıhan; Yaman, Yavuz; Department of Aerospace Engineering (2019)
Sandwich structures are widely used in aerospace industry due to their structural efficiency. In order to connect the sandwich structures to the adjacent parts, monolithic region is necessary. Because of the design requirements and strength necessities, this monolithic region must be strengthened. This reinforcement is provided by doublers [26]. In order to retain the weight advantage of sandwich structures, doubler span length must be minimum that keeps the core flatwise tension stress below the core allow...
The Impact of Architectural and Urban Patterns on the Behaviour of an Exhibited Angular Size-Illusion
Djordjevic, Djordje; Djukanovic, Gordana (Middle East Technical University, Faculty of Architecture, 2017-6-15)
This paper continues a research in which it has been confirmed that the angular size-illusion underpins a contradictory effect related to a seeming size-decrease of focused architectural and urban objects as the observer approaches them. It explores the impact of various architectural and urban patterns on the behavior of an angular size-illusion noticeable during movement. To obtain sustainable conclusions, real locations are selected and simplified. Simplification criteria are defined respecting the preco...
Interplay between architecture and landscape through Tadao Ando' s architecture.
Çeşmeli, Cen; Baş Bütüner, Funda; Department of Architecture (2019)
Regardless of the common grounds and shared entities, landscape and architecture have been segregated in theory and professional practice since late 19th century. This longstanding disciplinary division resulted in unhealthy built environment, composed of isolated buildings from their surroundings, which can be healed by an integrated practice of landscape and architecture. Thus, this study seeks to reveal conceptual frameworks that question the false dichotomy between architecture and landscape by analyzin...
Citation Formats
C. Alacacı, A. K. Erbaş, and B. Çetinkaya, Koni kesitleri ve koni kesitlerinin tarihsel gelişimi. 2013, p. 308.
METU IIS - Integrated Information Service open@metu.edu.tr