Comparative analysis of a one-channel microarray dataset by different methods



Comparative Power Loss Analysis of DCM Flyback Transformer Based on FEA, Numeric Simulation, Calculation and Measurements
Onay, Halil; Suel, Volkan; Ozgen, Tayfun; Hava, Ahmet Masum (2019-01-01)
The flyback transformer is a crucial part of the flyback converter, which has the highest portion of total power losses for most applications. Accurately prediction of the power losses due to flyback transformer early in the design stage provides an advantage about revealing reliable prototypes. In this paper, several loss prediction methods are applied for a 40W universal input and single output DCM flyback transformer as; analytical calculations via well-known Steinmetz and Dowell's formulas, a simulation...
Comparative analysis of variability modelling approaches in component models
Suloglu, Selma; Kaya, Muhammed Çağrı; Karamanlıoğlu, Alper; Entekhabi, Sina; Nikoo, Mahdi Saeedi; Tekinerdogan, Bedir; Doğru, Ali Hikmet (2018-12-01)
The results of a systematic literature review conducted for variability modelling in software component models are analysed and presented here. A well-planned protocol guided the screening of 3230 papers that resulted in the identification of 55 papers. Reviewing these papers, 23 of them were considered as primary studies related to our research questions. A comparison framework is introduced to further understand, assess, and compare those selected papers. Observations about the important aspects of compon...
Comparative study of soil water characteristic curve prediction methods
Ahmadiadli, Mohammad; Huvaj Sarıhan, Nejan; Toker, Nabi Kartal; Kürkçü, Mefküre Gamze (2012-06-30)
The soil-water characteristic curve (SWCC), which defines the relation between soil suction and water content, plays a key role in geotechnical studies of the unsaturated soils. Some researchers such as Brooks & Corey (1968), Van Genuchten (1982) and Fredlund& Xing (1994) have proposed curve fitting equations for SWCC. Fitting equations to the laboratory test data obtained from direct measurement of water content versus changes in matric suction is the most reliable method, but it is expensive and time cons...
Comparative study of missing observation estimators in the linear regression model.
Yıldırım, Erhan; Department of Economics (1980)
Comparative evaluation of steel mesh, steel fiber and high performance polypropylene fiber-reinforced concrete in panel/beam tests
Ceylan, Semih; Turanlı, Lütfullah; Department of Civil Engineering (2014)
Comparison of concrete mixtures containing steel mesh, steel fiber and polypropylene fibers were evaluated in terms of toughness, flexural strength, compressive strength and split tensile strength. Five types of concrete were prepared with steel mesh, steel fiber and polypropylene fiber with the identical water/cement (w/c) ratio and the identical workability. 10x60x60 cm plates, 8x8x32 cm beams and 10x20 cm cylindrical concrete specimens were prepared. Compressive strength, split-tensile strength and tough...
Citation Formats
V. Purutçuoğlu Gazi, “Comparative analysis of a one-channel microarray dataset by different methods,” 2013, Accessed: 00, 2021. [Online]. Available: