Low Level Damage Characterisation in FRP Sandwich Beams using the Lipschitz Exponent

Date

2004-07-07

Author

Dawood, Tariq
Shenoi, Ajit R
Veres, R. A.
Şahin, Melin

Metadata

Show full item record

Item Usage Stats

34
views

0
downloads

URI

https://hdl.handle.net/11511/83923

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Low velocity ballistic impact behaviour of the Al-matrix composites Kaya, Seyfi; Ögel, Bilgehan; Yıldırım, Orhan; Department of Metallurgical and Materials Engineering (2002) In this study, a drop-weight set-up was used for low velocity ballistic behaviour of various materials. The test includes the free fall of 5 kg hammer from a height of 4 m and impacting the specimen with a 8 mm diameter punching rod. The criteria in the test is penetration/no penetration as well as the failure mechanism in the tested specimen. The test materials were selected as Ck67 steel, pure Al, and AI-B4C composites. The Ck67 steel plate was quenched and tempered to yield UTS of 800 MPa and higher. Al-...
Low velocity ballistic characterization of steel armour plates by drop-weight test Şimşir, Caner; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2002) The primary aim of this study was to investigate the parameters that affect the low velocity ballistic performance of thin steel armour. Investigated parameters include armour plate related parameters (Hardness, UTS, Yield Strength etc.) and projectile related parameters (Hardness, Nose geometry). The relationships between the low velocity ballistic performance of steel armour plates and the static mechanical properties and mechanisms of ballistic failure are also investigated. For this purpose, a drop-weig...
Low-frequency conductivity tensor imaging with a single current injection using DT-MREIT Sadighi, Mehdi; Şişman, Mert; Acikgoz, Berk C.; Eroglu, Hasan H.; Eyüboğlu, Behçet Murat (2021-03-01) Diffusion tensor-magnetic resonance electrical impedance tomography (DT-MREIT) is an imaging modality to obtain low-frequency anisotropic conductivity distribution employing diffusion tensor imaging and MREIT techniques. DT-MREIT is based on the linear relationship between the conductivity and water self-diffusion tensors in a porous medium, like the brain white matter. Several DT-MREIT studies in the literature provide cross-sectional anisotropic conductivity images of tissue phantoms, canine brain, and th...
Low velocity impact damage on laminated composites simulations and correlations with tests Topac, Ot; Gozluklu, Burak; Gürses, Ercan; Çöker, Demirkan (null; 2015-04-15)
Low velocity impact characterization of monolithic and laminated AA 2024 plates by drop weight test Kalay, Yunus Eren; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2003) The objective of this study was to investigate the low velocity impact behavior of both monolithic and laminated aluminum alloy plates. For this purpose, a drop-weight test unit was used. The test unit included the free fall and impact of an 8 kg hammer with an 8 mm punching rod from 0.5 m to 4 m. The relationship between the change in static mechanical properties (hardness, ultimate tensile strength, yield strength, strain hardening rate) and low velocity impact behavior of monolithic aluminum plates were ...

Citation Formats

T. Dawood, A. R. Shenoi, R. A. Veres, and M. Şahin, “Low Level Damage Characterisation in FRP Sandwich Beams using the Lipschitz Exponent,” 2004, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/83923.