The Prediction of Distortion of Blank Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operations

2011-09-28
Şimşir, Caner
Hunkel, Martin
Lübben, Thomas
Hoffmann, Franz

Suggestions

The Prediction of Distortion of Case Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operation
Şimşir, Caner; Lütjens, Jörn; Rentsch, Rüdiger (2012-01-20)
The estimation of uniaxial compressive strength conversion factor of trona and interbeds from point load tests and numerical modeling
Öztürk, Hasan (2017-07-01)
The point load (PL) test is generally used for estimation of uniaxial compressive strength (UCS) of rocks because of its economic advantages and simplicity in testing. If the PL index of a specimen is known, the UCS can be estimated using conversion factors. Several conversion factors have been proposed by various researchers and they are dependent upon the rock type. In the literature, conversion factors on different sedimentary, igneous and metamorphic rocks can be found, but no study exists on trona. In ...
The determination of convective heat transfer coefficient during frying
Şahin, Serpil; Bayindirli, L (1999-02-01)
The convective heat transfer coefficient during deep-fat frying was determined at different temperatures. In this study, aluminum wool filled with potato mash having a size of 0.05 x 0.05 x 0.003 m(3) was used as a model sample. Frying was performed by fixing the sample vertically to make the system symmetrical. Sunflower oil was used as a frying medium at temperatures 150 degrees C, 160 degrees C, 170 degrees C, 180 degrees C and 190 degrees C. The centre temperature of the transducer particle was recorded...
THE PREDICTION OF THE VISCOSITY OF LIQUID HYDROCARBONS AND THEIR MIXTURES AS A FUNCTION OF TEMPERATURE AND PRESSURE - REPLY
ORBEY, H; SANDLER, SI;( Publisher: Wiley1994-06-01)
The numerical prediction of the steady-state pressure drop in a single-channel boiling system.
Gürgenci, Halim; Department of Mechanical Engineering (1979)
Citation Formats
C. Şimşir, M. Hunkel, T. Lübben, and F. Hoffmann, “The Prediction of Distortion of Blank Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operations,” 2011, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/83971.