Simulation of the Deformation and Residual Stress Evaluation during Tempering of a Hot Work Tool Steel

Date

2012-12-20

Author

Eser, Atılım
Bezold, Alexander
Bröckmann, Christoph
Şimşir, Caner

Metadata

Show full item record

Item Usage Stats

81
views

0
downloads

URI

https://hdl.handle.net/11511/84027

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Simulation of the Inelastic Behavior of Steel Braces Under Seismic Load Reversals Dicleli, Murat (null; 2012-09-24)
Simulation of seismic triggering and failure time perturbations associated with the 30 October 2020 Samos earthquake (Mw 7.0) Sopaci, Eyup; Özacar, Atilla Arda (2021-01-01) The 30 October 2020 Samos earthquake (Mw = 7.0) ruptured a north-dipping offshore normal fault north of the Samos Island with an extensional mechanism. Aftershocks mainly occurred at the western and eastern ends of the rupture plane in agreement with the Coulomb static stress changes. Mechanism of aftershocks located west of the rupture supported activation of the neighboring strike-slip fault almost instantly. In addition, a seismic cluster including events with Mw similar to 4 has emerged two days later a...
Simulation of Impact Induced Damage Process in a Carbon/Epoxy Composite Beam Bozkurt, Mirac Onur; Çöker, Demirkan; Parnas, Kemal Levend (2018-12-01) This paper presents numerical investigation of low-velocity impact (LVI) damage process in a unidirectional [0/90]s carbon/epoxy composite beam. Numerical simulations based on finite element method are conducted in ABAQUS/Explicit. A 3D model representing LVI experiments is generated. Matrix and fiber damage mechanisms are simulated by implementation of continuum damage mechanics based composite damage model with Hashin failure initiation criteria via a user-written VUMAT subroutine. Cohesive interfaces are...
Simulation of the dynamic response of planar statically determinate trusses to external forces Görür, Günseli; Bayseç, Sedat; Department of Mechanical Engineering (1989)
Simulation of Deformation and Residual Stress Evolution during Quenching and Tempering of Tool Steel Şimşir, Caner; Bezold, A; Broeckmann , C; Bambauer , K (null; 2011-01-01) The objective of this finite element simulation study is to predict deformations and residual stresses in the carbide rich cold work tool steel X220CrVMo13-4 after tempering. A thermo-metallurgical-mechanical model with experimentally determined phase transformation kinetics and phase dependent material properties is implemented to simulate the quenching and tempering cycles. Considering the transformation of retained austenite during tempering, high alloyed tool steels behave differently compared to most o...

Citation Formats

A. Eser, A. Bezold, C. Bröckmann, and C. Şimşir, “Simulation of the Deformation and Residual Stress Evaluation during Tempering of a Hot Work Tool Steel,” 2012, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/84027.