Implementations of a cross assembler and a software simulator for M6800 microprocessor

Download

003660.pdf

Date

1988

Author

Kaya, Serap

Metadata

Show full item record

Item Usage Stats

74
views

0
downloads

URI

https://hdl.handle.net/11511/8435

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Implementation of a risc microcontroller using fpga Gümüş, Raşit; Güran, Hasan; Department of Electrical and Electronics Engineering (2005) In this thesis a microcontroller core is developed in an FPGA. Its instruction set is compatible with the microcontroller PIC16XX series by Microchip Technology. The microcontroller employs a RISC architecture with separate busses for instructions and data. Our goal in this research is to implement and evaluate the design in the FPGA. Increasing performance and gate capacity of recent FPGA devices permits complex logic systems to be implemented on a single programmable device. Such a growing complexity dema...
Implementation of an Enhanced Target Localization and Identification Algorithm on a Magnetic WSN Baghaee, Sajjad; GÜRBÜZ, SEVGİ ZÜBEYDE; Uysal, Elif (2015-10-01) Wireless sensor networks (WSNs) are ubiquitous in a wide range of applications requiring the monitoring of physical and environmental variables, such as target localization and identification. One of these applications is the sensing of ferromagnetic objects. In typical applications, the area to be monitored is typically large compared to the sensing radius of each magnetic sensor. On the other hand, the RF communication radii of WSN nodes are invariably larger than the sensing radii. This makes it economic...
Implementation of (63-43) reed-solomon decoder with the 8749 single-chip microcomputer Şut, Ercan; Yücel, Melek D.; Department of Electrical and Electronics Engineering (1990)
Implementation of the heed clustering protocol with sleep scheduling in tinyos 2 on a wireless sensor network testbed Özkan, Canay; Uysal Bıyıkoğlu, Elif; Department of Electrical and Electronics Engineering (2013) Energy efficient operation is often critical for wireless sensor networks (WSN), because network nodes operate on limited batteries. The aim of this thesis is to realize an implementation of an energy-efficient, scalable and competitive clustering protocol, HEED on MICAz motes using TinyOS 2 with further energy-efficiency enhancements. A working testbed is constructed, on which the network organizes itself to send periodic sensor measurements to a central station. In order to control overall energy consumpt...
Implementation of a prototype thyristorized reactive power compensator Pişkin, M Sadık; Ermiş, Muammer; Department of Electrical and Electronics Engineering (1988)

Citation Formats

S. Kaya, “Implementations of a cross assembler and a software simulator for M6800 microprocessor,” Middle East Technical University, 1988.