Comparison of a BFSK system with rectangular and Nyquist pulse shaping and the effects of if filters on the performance.

Download
1988
Üner, Mücahit Kani

Suggestions

Comparison of three orientation agreement strategies in self-propelled particle systems with turn angle restrictions in synchronous and asynchronous settings
Samiloglu, Andac T.; Gazi, Veysel; Koku, Ahmet Buğra (2008-03-01)
In this study, we compare three different orientation agreement strategies of multi-agent/particle systems under different conditions. We investigate the behavior of multi-agent systems utilizing these strategies with different combinations of the following properties: (i) the multi-agent systems may be synchronous or asynchronous, (ii) they may travel in bounded or unbounded regions and (iii) the mobile agents may have turning speed restrictions. The agents/particles are assumed to move with constant speed...
Comparison of the short and long-term degradation behaviors of as-cast pure Mg, AZ91 and WE43 alloys
Ocal, Ezgi Butev; ESEN, ZİYA; Aydınol, Mehmet Kadri; Dericioğlu, Arcan Fehmi (Elsevier BV, 2020-02-01)
The corrosion behaviors of pure magnesium, AZ91, and WE43 alloys have been evaluated by weight loss, hydrogen evolution rate, pH change measurements and potentiodynamic polarization as well as electrochemical impedance spectroscopy (EIS) methods. Main corrosion product formed on the surface of Mg/Mg-alloys after immersion of 24 h was Mg(OH)(2) on the other hand, at the end of the 20 days additional CaCO3 which was found to display a critical role in degradation characteristics of the samples, was found. Exa...
Comparison of sustained boiling flow instabilities in a four parallel channel system with and without cross-connections.
Yamalı, Cemil; Department of Mechanical Engineering (1976)
Comparison of the overlapping lattice and thefinite element approaches for the prediction of the collapse state of concrete gravity dams
Soysal, Berat Feyza; Arıcı, Yalın; Binici, Barış; Tuncay, Kağan (null; 2017-10-11)
Estimating the collapse limit state of concrete gravity dams within the framework of performance based design is challenging due to the uncertainty in modelling the response of these systems and the strong dependence of the behavior on the ground motion. In this context, the purpose of the study is to investigate the prediction capability of numerical tools in determining the collapse state of concrete gravity dams. The first tool used to this end is the classical finite element method with the smeared crac...
Comparison of transient two-phase flow instabilities in a four parallel channel upflow system with and without cross-connections.
Özboya, Nail; Department of Mechanical Engineering (1975)
Citation Formats
M. K. Üner, “Comparison of a BFSK system with rectangular and Nyquist pulse shaping and the effects of if filters on the performance.,” Middle East Technical University, 1988.