INTERNAL BALLISTIC DESIGN OPTIMIZATION OF SOLID ROCKET MOTORSWITH DIRECT SEARCH METHOD

2016-06-06
Açık, Sevda
Dursunkaya, Zafer
Toker, Atılgan

Suggestions

Internal ballistic design optimization of a solid rocket motor
Açık, Sevda; Dursunkaya, Zafer; Department of Mechanical Engineering (2010)
Design process of a solid rocket motor with the objective of meeting certain mission requirements can be specified as a search for a best set of design parameters within the overall design constraints. In order to ensure that the best possible design amongst all achievable designs is being achieved, optimization is required during the design process. In this thesis, an optimization tool for internal ballistic design of solid rocket motors was developed. A direct search method Complex algorithm is used in th...
Internal friction studies.
Özdural, Hüsnü; Department of Metallurgical Engineering (1972)
Internal friction studies in niobium.
Konuk, Hüsnü İlhami; Department of Metallurgical Engineering (1975)
Internal friction studies in niobium.
Durdu, Bülent; Department of Metallurgical Engineering (1973)
Ballistic properties and burning behaviour of an ammonium perchlorate/guanidine nitrate/sodium nitrate airbag solid propellant
Ulaş, Abdullah; Kuo, K. K. (Elsevier BV, 2006-10-01)
An experimental investigation on the determination of ballistic properties and burning behavior of a composite solid propellant for airbag application was conducted. The experimental results were obtained using a high-pressure optical strand burner. Steady-state burning rates were determined for a pressure range of 20.8-41.5 MPa and initial propellant temperatures of -30 to +80 degrees C. For the pressure and temperature ranges tested, the temperature sensitivity was on the order of 1x10(-3) K-1. The pressu...
Citation Formats
S. Açık, Z. Dursunkaya, and A. Toker, “INTERNAL BALLISTIC DESIGN OPTIMIZATION OF SOLID ROCKET MOTORSWITH DIRECT SEARCH METHOD,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/84491.