Ups and Downs of Running a Spinoff company for 19 years!

2017-09-12
Oral, Ahmet
Show full item record
26
views
0
downloads
https://hdl.handle.net/11511/84607
Unverified, Conference / Seminar

Suggestions

Old and New Problems in the Balkans and Marxism
Türkeş, Mustafa (2018-12-01)
Efforts to determine the place of Marxism in the Balkans in a historical manner seem to enable us to outline not only the historical importance of Marxism but also to point out more precisely its relevance with contemporary problems and possible solutions in the Balkans. In order to outline very briefly the place of Marxism in the Balkans, this paper first seeks to discuss the old (late 19th, early 20th) and new (late 20th, early 21st century) common problems people in the Balkans encountered with a view to...
Uncertainty Analysis of Heat Transfer Predictions Using Statistically Modeled Data From a Cooled 1-1/2 Stage High-Pressure Transonic Turbine
Kahveci, Harika Senem (ASME International, 2014-06-01)
This paper compares predictions from a 3D Reynolds-averaged Navier-Stokes code and a statistical representation of measurements from a cooled 1-1/2 stage high-pressure transonic turbine to quantify predictive process sensitivity. A multivariable regression technique was applied to both the inlet temperature measurements obtained at the inlet rake, the wall temperature, and heat transfer measurements obtained via heat-flux gauges on the blade airfoil surfaces. By using the statistically modeled temperature p...
Optimum short-range coordination of hydrothermal power generation by dynamic programming.
Arikan, Yıldız; Department of Electrical Engineering (1968)
Optimum design of 3-d irregular steel frames using ant colony optimization and harmony search algorithms
Aydoğdu, İbrahim; Saka, Mehmet Polat; Tokdemir, Turgut; Department of Engineering Sciences (2010)
Steel space frames having irregular shapes when subjected to lateral loads caused by wind or earthquakes undergo twisting as a result of their unsymmetrical topology. As a result, torsional moment comes out which is required to be resisted by the three dimensional frame system. The members of such frame are generally made out of steel I sections which are thin walled open sections. The simple beam theory is not adequate to predict behavior of such thin-walled sections under torsional moments due to the fact...
Optimum topology design of various geometrically nonlinear latticed domes using improved harmony search method
Carbas, Serdar; Saka, Mehmet P. (2012-03-01)
Domes are elegant and economical structures used in covering large areas. They are built in various forms. According to their form, they are given special names such as lamella, network, and geodesic domes. In this paper, optimum topological design algorithm is presented that determines the optimum number of rings, the optimum height of crown and tubular section designations for the member groups of these domes. The design algorithm developed has a routine that generates the data required for the geometry o...
Citation Formats
A. Oral, “Ups and Downs of Running a Spinoff company for 19 years!,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/84607.
METU IIS - Integrated Information Service open@metu.edu.tr