Design and analysis of baluns and transmission line transformers with coupled lines approach

Download
006879.pdf
1989
Masarcıoğlu, Hüsnü Ahmet
Show full item record
64
views
0
downloads
https://hdl.handle.net/11511/8470
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and characterization of electromagnetic wave absorbing structural compsites
Gürer, Göksu; Dericioğlu, Arcan Fehmi; Department of Metallurgical and Materials Engineering (2010)
Electromagnetic interference (EMI) is one of the most common problems encountered in microwave applications. Interaction of electromagnetic (EM) waves from different sources may result in device malfunction due to misinterpretation of the transferred data or information loss. On the other hand, development of materials with reduced radar detectability is desired in defense applications. Considering the limitations in weight and thickness, development of lightweight structural materials with enhanced electro...
Design and development of electromagnetic wave absorbing composites effective at microwave frequencies /
Hamat, Özgür; Dericioğlu, Arcan Fehmi; Department of Metallurgical and Materials Engineering (2014)
In the scope of this study, EM wave absorbing composites effective at microwave frequencies having crucial properties for their structural applicability will be designed and developed making use of a novel approach originating from our research group. For this purpose, surfaces of glass and polymeric fiber woven fabrics were modified via metal coatings with nm order thickness, where EM wave absorbing structural composites were formed by incorporating multilayered combinations of these surface-modified woven...
Design and construction of a cw mode nd:YAG laser prototype
Eryılmaz, Ertan; Esendemir, Akif; Department of Physics (2004)
In this thesis a theoretical background of Nd:YAG lasers has been presented and key parameters of a design have been stated. Both pulsed mode and CW mode designs have been made; a 500mJ xenon flash lamp has been investigated as the pulsed light source and a 500W tungsten halogen lamp has been used as the continuous light source for optical pumping. Closed cooling system has been constructed. De-ionized water has been used as coolant. The goal has been acomplished by constructing a CW mode prototype. The out...
Design and construction of y-junction stripline circulators.
Ayter, Seviğ; Department of Electrical Engineering (1976)
Design and construction of axial slow flow continuous wave folded carbon dioxide laser
Kenar, Necmettin; Öke, Gülay; Department of Physics (2003)
Design and realization of a conventional carbon dioxide laser was performed. Gas composition and gas pressure effects on laser output power were studied. Effects of input electrical power and current on laser power were also investigated. Beam profiling of the laser beam was performed by pinhole method. Laser beam parameters like beam divergence, beam propagation factor were measured. These properties were extracted from focusing a laser beam in near field and performing a number of cuts across the beam cro...
Citation Formats
H. A. Masarcıoğlu, “Design and analysis of baluns and transmission line transformers with coupled lines approach,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr