Mechanical theorem proving in classical geometry

Download
002920.pdf
1987
Duyguluer, Ferruh
Show full item record
68
views
0
downloads
https://hdl.handle.net/11511/8480
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Mechanical modeling of Thin Films Bonded to Functionally Graded Materials
GÜLER, MEHMET ALİ; Gulver, Yusuf Fuat; Dağ, Serkan (2008-09-25)
In this study the contact problems of thin films bonded to Functionally Graded Materials (FGM) are considered. In these problems the loading consists of any one or combination of stresses caused by uniform temperature changes and temperature excursions, far field mechanical loading, and residual stresses resulting from film processing or in the manufacturing process of the graded coating. The primary interest in this study is in examining stress concentrations or singularities near the film ends for the pur...
Mechanical strength of 3D printed objects: experimental and numerical investigation
Başara, Gözde; Tarı, İlker; Department of Mechanical Engineering (2017)
The number of people and the industries that are using 3 Dimensional (3D) printing increases everyday; however, the home-use of 3D printing remains below expectations partially due to limitation in the printer size. Many different technolo-gies can be used in 3D printing. In this study Fused Deposition Modelling (FDM) is used. This method is commonly used for home-use 3D printing. In FDM, there is a wide range of materials that can be used and for this study the material is chosen as Poly Lactic Acid (PLA) ...
Mechanical behaviour of polymeric lattice structures produced by additive manufacturing
Kalaycıoğlu, Şükrü Güray; Özerinç, Sezer; Department of Mechanical Engineering (2022-11)
Additive manufacturing (AM) is a manufacturing method based on the layer-by-layer deposition of the desired geometry. Polymer AM provides means to produce compliant polymeric structures for impact-absorbing applications. The recent introduction of foaming elastomeric filaments opened a new design space for achieving optimized impact absorbance performance. This thesis investigates this route through the mechanical testing of solid and cellular polymer foam structures produced by additive manufacturing. The...
Mechanical behavior of additively manufactured polymer composite structures and interfaces
Kepenekci, Mehmet; Özerinç, Sezer; Department of Mechanical Engineering (2021-9-6)
Additive manufacturing (AM) is a technology based on the layer-by-layer production of parts. Fused filament fabrication (FFF) is one of the most cost-effective and popular AM techniques for the production of polymeric structures. While the initial use of FFF was limited to thermoplastics such as PLA and ABS, recent advances enabled the printing of composite materials and structures for superior mechanical performance. Multi-material printing through dual-nozzle systems offers a unique opportunity towards t...
Mechanical Characterization of Elastomeric Lattice Parts Produced by Continuous Liquid Interface Production
Özerinç, Sezer; Neshani, Roozbeh; Mcgregor, Davis J.; Tawfick, Sameh; King, William P. (2021-11-29)
Citation Formats
F. Duyguluer, “Mechanical theorem proving in classical geometry,” Middle East Technical University, 1987.
METU IIS - Integrated Information Service open@metu.edu.tr