General purpose simulation of computer networks.

1987
Onbasioglu, Esin
Show full item record
64
views
0
downloads
https://hdl.handle.net/11511/8482
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Direct Numerical Simulation of Liquid Flow in a Horizontal Microchannel
Tarı, İlker (2005-07-21)
Numerical Simulations of liquid flow in a micro-channel between two horizontal plates are performed. The channel is infinite in streamwise and spanwise directions and its height is taken as 3.1 x 10(-4) m which falls within the dimension ranges of micro-channels. The Navier-Stokes equations with the addition of Brinkman number (Br) to the energy equation are used as the governing equations and a spectral methods based approach is applied to obtain the required accuracy to handle liquid flow in the micro-cha...
Direct numerical simulation of liquid flow in a horizontal microchannel
Kükrer, Cenk Evren; Tarı, İlker; Department of Mechanical Engineering (2005)
Numerical simulations of liquid flow in a micro-channel between two horizontal plates are performed. The channel is infinite in streamwise and spanwise directions and its height is taken as m, which falls within the dimension ranges of microchannels. The Navier-Stokes equations with the addition of Brinkman number (Br) to the energy equation are used as the governing equations and spectral methods based approach is applied to obtain the required accuracy to handle liquid flow in the microchannel. It is know...
Numerical simulation of laminar reaction flows
Tarhan, Tanıl; Selçuk, Nevin; Department of Chemical Engineering (2004)
Novel sequential and parallel computational fluid dynamic (CFD) codes based on method of lines (MOL) approach were developed for the numerical simulation of multi-component reacting flows using detailed transport and thermodynamic models. Both codes were applied to the prediction of a confined axisymmetric laminar co-flowing methane-air diffusion flame for which experimental data were available in the literature. Flame-sheet model for infinite-rate chemistry and one-, two-, and five- and ten-step reduced fi...
Practical Realization of Magnetic Resonance Conductivity Tensor Imaging (MRCTI)
DEĞİRMENCİ, EVREN; Eyüboğlu, Behçet Murat (2013-03-01)
Magnetic resonance conductivity tensor imaging (MRCTI) is an emerging modality which reconstructs images of anisotropic conductivity distribution within a volume conductor. Images are reconstructed based on magnetic flux density distribution induced by an externally applied probing current, together with a resultant surface potential value. The induced magnetic flux density distribution is measured using magnetic resonance current density imaging techniques. In this study, MRCTI data acquisition is experime...
Direct identification and expansion of damping matrix for experimental-analytical hybrid modeling
Özgen, Gökhan Osman (Elsevier BV, 2007-11-20)
The theory of direct experimental identification of damping matrix based on the dynamic stiffness matrix (DSM) method is further developed in this work. Based on the relationship between the DSMs of the smaller experimental model and larger analytical model, the mathematical relationship between the damping matrices of the two models is established. Examining the relationship, two methods are developed that can be used to expand the experimental damping matrix to the size of the analytical model. Validity o...
Citation Formats
E. Onbasioglu, “General purpose simulation of computer networks.,” Middle East Technical University, 1987.
METU IIS - Integrated Information Service open@metu.edu.tr